I wired mine....my first time.....in 3 days. Just knock it out in stages and pay attention. It is just 12 volts. It comes from the positive...
I just wrote this up to answer another post, so I thought I'd add it here...... It really is simple. Lay out the harness. it should be...
Check my thread on how to wire an AD. https://talk.classicparts.com/showthread.php?t=9536 It really is simple. Lay out the harness. it...
The guages look nice. I have thought about using the plastic wood myself.
I'm not shure where it is either. I took the origional knob, drilled through the flat on the opposite of the handle with a very small bit and...
Made my own tank.... https://talk.classicparts.com/showthread.php?t=9177 I like the Its a Snap/ EZ Wire harness, small fuse box , GM colors...
The problem comes in with the stainless strip usually.
A friend needs a 3rd row seat if anyone sees one reasonably priced.
That would be the clutch cover, you may have a rear main seal gone.
Check out some of mhy build threads and picture galleries to see what you are in for.....
Weld on, but very simple to do.
Consider it extra cooling....... If your rubber bumpers are touching, that is about as good as it gets. You may be able to adjust the hood...
SCRUBLINE????????? BAH. [IMG] [IMG]
Guess Uncle Sam gets what he wants, huh? Chevy with GMC guages and engine......Or some farmer had a GMC to swap in, then used the guages for the...
Posies make a really nice spring. I have a set coming Thursday.
In that case, blue tape EVERYTHING to avoid chips and scratches. Also get a NEW set of rubber hood bumpers to keep everything off of one another.
Check my build thread. The Genie mounts to the lower edge of the engine at the oil pan, the horn mounts to that tab on the intake with the 2...
Cut off all mounts from the Camaro....I'm about to do this at the shop on a 2001 Mustang rear end for the Ford We are building. Now smooth the...
First, the gaps WILL NOT be perfect, they never were. Line up the hood at the cowl as best you can. Now, with everything just hand tightened...
If you swap the whole bed, including crossmembers, you ahould be good to go. The crossmembers have holes in particular spots for 8 or 9 boards,...
Separate names with a comma.
