Permanently? Cut the straps off at the loops on the floor.
There are 2 gears involved, the drive gear, attached to the output shaft and the driven gear that goes out to the speedo cable.
Actually, both. Factory spot welded them, and 2 fender bolts go right through them. Mine were bolted when I got it, it pulls away a bit and...
Speedo gear needs to be changed. They make a corrector, or find out what your trans is and talk to a tranny pro, they can direct you to the...
Usually is.
Most lighters ground through the outer shell to the dash. You had something touching the center element. ALWAYS put a fuse within 6 inches of a...
Magnet? Lots of colorful language?
Do it in seperate pieces.....future serviceability and all....
Etching has some acid in it to help "bite" the bare metal. High build have more body (thicker) and build up to help cover and fill small pits...
That is about as far up as I have been on the parkway. You should come to Goodguys Charlotte next weekend.
You really want to use a high build primer. You can pick up a cheap HVLP spray gun from Harbor Freight and spray it yourself. It is thick enough...
It was an origional V8 (292 Y block) with a 4speed on the floor. It now has a 390 FE with a 5 speed on the floor. It now Hauls A$$! and is a...
Spray primer, then mist some black (or whatever color) over the surface, then wetsand. All low spots will still have black overspray, all high...
I have, however had MANY problems with aftermarket replacement single guages, especially temp and oil pressure guages, but not the complete package.
The rear suspension of your truck is what NASCAR rear ends are based off of. If the rear is lifted a little, the panhard will shift the rear ever...
I have used 2 complete repro speedos, and have not had any problems at all. In fact, one of them is in my truck.
The alarm lights LEDs stuck out of a push fit housing, I'm not sure yours do. I mounted 2 LEDs in my quad guage for turn signal indicators. I...
This one I will allow myself to be seen in. [IMG]
Drill the hole to the EXACT size of the white part, then slide them in. When I ws installing car alarms, we would pull the led out of the housing...
Youtube it and post a link.
Separate names with a comma.
