Thanks, Bill, You answered several questions, the valving and what the pressure should be on the air line. A 60 psi air regulator is probably...
The state is converting the road in front of the shop to multi-lane and have the water either off or low pressure several days a week. I have two...
Robert, Whoever designed the human body did a heck of a job and I'd bet time will be on your side for recovery even though it's like block...
If your rear mounts are still on the bell housing you need no transmission mount. If your engine is side mounted then a simple channel or tube...
Since it was so convenient did you stop to take a rest. Good girls in HS probably wouldn't be seen riding in your truck.
Called Dakota Digital and they can calibrate either digital or analog AD speedos for kilometers. They are a bit pricey but if they can do it so...
I would check out an Australia connection. I have seen several AD's from Down Under on different sites and I would think the speedos would have K's.
You might check out soft tops on military vehicles of several different countries. We had what I believe was called an M6 small troup carrier that...
A bit short on info here. The wire from the switch to the starter solenoid passes through the starter button.
Lokar offers a floor shift with all the bells and whistles if your pocketbook is fat. To pass safety inspection we use an all weather starter...
We have put LS engines into probably a dozen different kinds and years of rides but the one in the 70 GMC was the first for this style truck. Fit...
We just keep the standard shift column, hold the shift lever up in the low/reverse position and tack lever at bottom so it can't drop back down...
Martinius, This is a guess but since they made a high cap and a low cap distributor that fits a 216/235 I would guess Pertronix might make the...
The car is a high mileage car and the leather inside has many cracks but the offer was much appreciated, however, after checking it out it is WAY...
We have the best in the world that keep coming back for years after their project has long been finished. The man with the 70 GMC that has the...
Could use a little more information. Still using straight axle and factory steering box? If you are and don't HAVE to have tube headers then a...
No, had a three speed on the column until my wife wanted to start driving and couldn't handle a standard shift. Then went with a three speed...
From 1963 up to the time Chevy started using the skinny 60 degree block (like in an S10) all bell housing bolt patterns are the same from the 4...
Dan, I have found an engine with near identical horse power and torque as yours works fine with a 2.73 rear on Texas flat lands but not in the...
We have spent many hours on a dyno concerning exhaust and found that GOOD rams horn manifolds out perform most cheap headers. If one can afford...
Separate names with a comma.
