With disc use all 3/16 steel tubing. One rubber hose for each front caliper and one rubber hose with a 3/16 inverted flare "T" mounted on the rear...
The vent handle has a pin that you tap out with a very small punch. It wiggles off kind of hard sometimes and there is a wavy tension washer that...
Now that is some fine photo work with measurements and all.
Probably best to tear down and re-do this 327. Sounds as though some of the valve stems have seized in the guides. When a valve can't move only...
We have got rid of the chains and tied the bed sides much more solid with seat belt latches. The yards usually charge about five bucks so the...
I only like three colors: light blue, medium blue, or dark blue so it's a home to this old fart. Looks great.
If you aren't painting after using silicone it's OK but if you do paint after anything with silicone in it then fish eyes are guaranteed. If there...
The 47 and 48 were flat strips that screwed on. From sometime in 49 they used C channel with rolled over top edges that the windlace slid into...
52 pics Need to show fuel filler, it's for a motorcycle.
52 pics And a few more that show a close up of column mod, shift linkage, and his 10 minute alternator bracket.
The 52 that a customer and friend, now retired, wanted to do himself came back for a few tweaks; shifter rattle and valve cover leak, so as he had...
Lakeroadster, Understand your confusion but the name of the shop is 121 Rod AND Restoration. Of the 16 being worked on right now eight: 30 Model...
John, When I watched him he was welding the inner fender back onto the outer so there was no gap to contend with. You are right, it would take a...
To quote an old folk song lyric. All the years I run the shop it had vehicles from the 30's, 40's, and a few 50's. Now that my nephew is in charge...
Old dog just learned new trick so I thought I would pass it along. Newly hired panel man was replacing the rusted out fender bead on a 69 Camaro...
I am often asked about how to go about installing an IFS or IRS in a straight axle car/truck and my standard answer is first get a computer or...
For shame Bill, we were using bear claw latches for 20 years before anyone had ever heard of "Altman" or "Tricke". On many of the installs back...
Farmall's = fond memories for this old farm boy. Thought heaven was at hand when we got an old F12 that had a CRANK. It's John Deere predecessor...
Just put bear claw latches in a 51 yesterday and I think the two bottom screws were #10x1". The top screw in the dimple was a #8x1/2". If the...
Got me scratching my head on this one. I wonder if there is some new ingredient in the 90W. I can see where there would be a warning on not to use...
Separate names with a comma.
