I don't like the abrupt ending of the aftermarket roll pans so we make ours that incorporates about six inches of an old stake pocket. The stake...
Looking great. I looks like the IRS may be from a Lincoln/Cougar/T-Bird. If it is and the alignment shop can't dial in the caster then contact...
Bill, It is an axle strap for snubbing to trailer. Really didn't mean to step on any toes as the intent was to show that a good handing good...
Mike, the accelerator pedal on your 014 GMC is just one small step above a pacifier AND brings back nightmares. We had a 57 Chevy and a 70 442...
A very well know custom rod builder dropped by the shop today and in the course of our discussion I asked him how often he used a 350 sbc engine....
Done a 55 with a Camaro front clip and a Jaguar IRS. Parts run $500 and it does handle well. Have also used the Lincoln/T-Bird/Cougar IRS which...
Since you stated you wanted to avoid welding then once you get the replacement panel you can first trim the hole in the dash to a nice even...
I know that 3/4T up through 72 is a direct pumpkin swap out, don't know about other years and brands. We used to look for one with a big block 396...
Working on a project together brings about bonding that is stronger then any other activity. If one shows dedication and patience to deal with...
58-62 are the easier engines to work with. The 57 and older had main cap shims even with the shell bearings. By 58 they are like any modern engine...
Really nice truck. I'm surprised to see it has stainless windshield trim and painted door window trim but I like it, probably in large because it...
On the transmission and rear end you just fill with 90wt till the lube starts to dribble out the filler hole. Engine is 5 quarts. I use 5 quarts...
Supposed to be sunny and in the mid-sixties here so am going to try and get into my storage yard with the badass V8 forklift to flip a truck over...
Yep, that's my new description on ebay. I made my very first post and it will be my last. It is for a 1969 Camaro Z28 302DZ block. The fact that...
With a smaller bore your pedal will go down closer to the floor but as long as it stops and inch or more before bottom and is solid your fine. You...
Used Wilwoods on our race cars for years, good brakes. Before Wilwood existed we used Girling brakes as the U.S. was way behind Europe on the disc...
The 74 and older Novas had the steering box to the rear and were very nice but they are extinct now so the 75 and up is what is used. We have a 49...
It should not move at all since it's supposed to be a very tight press fit. Hopefully all the wear is in the balancer and not the crank snout. You...
Your last sentence can't be done; BEST and CHEAPEST. For best follow what Russ said. For cheapest a 305, a 350 trans, an Explorer 2.73-3.25 rear...
It is pressed on. I have used a 61 or 62 car balancer on an old pickup because many of these came with dual pulleys so I guess they are pretty...
Separate names with a comma.
