The numbers and letters seem to be very easy to read on your present hose so google this and see if it gives the specs such as length and end...
Andy, An S10 swap for a first timer is quite an undertaking and not a weekend project. If you do decide to go with it let me know and I can...
You might check to see if the actuator rod from the pedal to the master cylinder has some free travel in it. If it doesn't it won't let the fluid...
Nate, Ken, and others have said a 37BC was a favorite and to update them when work started on it again. Last weekend was the annual Bug Tussle...
Finally, FINALLY, got some pictures uploaded on the windows 8 machine and will try to post.
Bill, It's a rear wheel drive so they use the 4L60E trans. As far as pictures go one of you is going to have to take my hand and very SLOWLY lead...
Instead of guessing and trying this and that I'd find out for darn sure if is the starter or something else. Take your positive 6v battery cable...
Made a deal on a 2005 Trailblazer that is a roll over with 105,000 miles. Will start and drive if you're really short or scrunch down in the seat....
For one that has sat for six years there is a good chance the rod and main journals are dry and it shouldn't be turned at all till it's primed...
One side of the brake light switch (BLS) is always hot. The brake lights worked on these old trucks with NO other switch on and were often known...
With either KBS or POR15 it is not necessary to clean to bare metal, in fact "POR" stands for "paint over rust". I prefer KBS as it is much...
I have been wanting to build one more six cylinder AD while eye sight and a worn out body will still partially function. My dirty little secret...
Craig, I found the dies so if you need some I'll stamp out a few. Shouldn't run more than three bucks apiece. We usually only make parts for our...
Separate names with a comma.
