Pull the knob all the way out, then feel around for a little button on the bottom of the light switch. Push the little button and pull the knob...
Most factory setups put the crossover within about 12" of the header pipe joint, but it works fine at the first possible location clearance allows.
This is where the rubber window wiper goes. It is usually dried and hard as a rock and broken off. I find that you have to bend up the tab in...
If the parts will be hanging inside, out of the weather and humidity, they will last for a long time with basic primer. Just pick up some primer...
Mine was 3/4 ton to start with. Unless you are going to restore it, a 1/2 ton swap is very popular. Just swap out the front with a complete unit...
I had to do a little custom hammer clearancing on the 53 I just put a 235 in. Just message the front edge, keep an eye on the shape of the rest...
Cut it out. It is not necessary with the other cross members.
Cig. lighter is the easiest. Just keep the flame moving.
I've always found the spring between the upper shaft bearing and the steering wheel.
Thats kinda what we tell the new comer yankees around here. If you find yourself in a ditch, don't worry. Some good ol boys with a 4wd will be...
DON'T cut the doors. You can easily make some 6" speaker pods on the kick panels that will keep the speakers somewhat hidden and sound great. I...
There is a good chance that there was more than $39k in that truck.
Here is my thread on column shortening..... https://talk.classicparts.com/showthread.php?t=7908 this has already been done to yours. You can...
use photobucket. Copy and paste the IMG link here.
I have lots of small /trim parts that have some weathering/pitting. Let me kno what you are looking for. My friend B.J. has lots of parts laying...
Shocks help dampen the movement, so it doesn't keep bouncing after you hit a bump. It also helps to keep the wheels from jumping up off the...
The early shots of the twins....... [ATTACH] [ATTACH]
I thought I had taken pictures of the manifold stud broken off in the 53. I found a nut with a hole smaller than the remainder of the bolt in the...
I'm missing that truck. It really drove nice. Replicating a much earlier shot of the 2 together...Right before we left to load it up for the...
What size are the header outlets? 2" should be more than enough for that engine. You might even need to go smaller when running 2 pipes to keep...
Separate names with a comma.
