It's not out 180 or it never would have started. With the pointer on the bb pop off the cap and see where the rotor is aimed. It will probably be...
It has been my experience that Steele has the high quality upper end market wrapped up and just doesn't need any promos. Their product is the best...
Just to think most Americans are of the mind that most anything to do with cars originates in California or along Woodward Avenue in Detroit. I'm...
Been done many times by both shops and hobbyists. Do a search on this forum, the Stovebolt forum, and the Inliners forum. A couple of tips is to...
Yes, silicon bronze would do just as good or maybe better. There is not much surface area to bond to but I'm going to try Panel Bond the next time...
Your hinge (front) pillar has definitely been moved forward and rolled outward. Three pull plates attached where the weather strip bumps up...
Dang, Nate, I sure wish you had those lottery winnings and was nearby. I made an "Old Man" friendly ride out of my 37 Buick so a "Banged Up" ride...
Sonny, if no trouble in 10k miles I sure wouldn't worry about them but would check on a regular basis. I was wrong about the steel ones costing...
Apples and oranges. You can put small parts in the tumbler, flip the switch, and forget about them other than to check occasionally to tell when...
Federale, you are 100% right on ones that use the aluminum spacers and most do because they are less than half the price of the billet steel ones....
I couldn't do it on a customers vehicle but on my own project which doesn't pay anything anyway I still use the lost art of hammer welding. When...
I have found that custom wheels with extreme offset or in this case inset put a huge strain on the wheel center. If the center were made with...
Jerry, you have lucked out and found the dumbest person on this site computer wise to give a post a picture tutorial. After you have typed in your...
You can go to www.bowtieoverdrives.com and click on calculate speedometer gears for either the 700 or 200 OD trans. I just measure the tire...
A clutch plate won't work if it's in backward so something is moving the plate and springs towards the bolt heads. Could the plate be wrong and...
As Ken stated, just keep going around the glass with the blade parallel to the glass surface till you hear the point of the blade scratching...
Nate, it can be used as though it is an S10 but since the track is quite a bit more narrow I would think high, wide loads would cause swaying. We...
Andy, we have done a number of these swaps and I have extensive photos of the process but, unlike Russ, I do not know how to put...
Oops, it's not in double shear but is doubly anchored.
We use "Door Ease" on the trim molding clips. It comes in like a lipstick tube and is for door latches. It is like a heavy bees wax so it doesn't...
Separate names with a comma.
