I'm not familiar with the Explorer rear end--yet. What are the round canister looking things under the left axle tube. Nice sanitary work and the...
Tony, scroll down to the thread "tranny Q's on other forum". That is where I gave a few tips.
Thank you so much Ken, but for them-not for me. They called when they found the car had been selected for the Great Eight award and I don't think...
Gave reply on cchars post.
Make darn sure the solenoid is good because if not they are hard to find and cost as much as the whole OD trans did to start with. The 6v ones...
There is a manual box that is a direct replacement for the power box. The same trucks that had p/s also could be had without. If your racing then...
Here's one with the 215/85R16's that Bob suggested. Very close to the original 6.50's.
I'm sure it can tow 5000#'s or more but STOPPING is another story. For regular towing in hilly areas you could sure use a brake upgrade. Power...
Yes it will.
Submersion in an iron phosphate solution and heating to about 200F until the bubbles stop. Many gun people prefer it over bluing though they...
Something that gets overlooked many times is the spring eye bushings, even by ones that replace the shackle pins and bushings. When worn these...
Thanks everyone, Fedhill USA sells 25' rolls for $55. There is a place in the UK that sells a 25' roll for 9 pounds but shipping would eat up any...
Guys, I believe the studs on a 235 take a 3/8-24 nut and a 9/16 wrench. Most all of the other carburetors on all brands of cars including V8's do...
What can you tell me about Cunifer ( copper-nickel-steel) brake tubing? Been reading and it seems to be the cats meow for ease of working and...
Google "Hagan" and I think they have "vent window eliminator kit" listed and if not it's in their catalog. If you have a/c it's fine but the vents...
And, Neal, has agreed to help with the next cattle drive just down the road from my shop. The counters chair is set up close to the cattle pen...
Sometimes using a Ford water heated carb spacer is an easy way to get heat to the carb base. They were use on 1 bbl, 2 bbl, and 4 bbl carbs and...
We use Dynamat but definitely do not buy from auto supply places but rather from stereo supply where it is much cheaper and in the identical box....
The best line I've heard on this subject was where a Packer and Steeler supporter were being interviewed and though each wanted their team to win...
This is a 48 likes Mike's that shows the factory mounting. The rear has been changed to an open driveshaft so it is very much like a 55 1st...
Separate names with a comma.
