I think each one of you is on the right track. The by-pass wire was in a separate package and 14 gauge in size. I already had a 10g wire the right...
Put your thinking caps on and explain this. I put a new 105 amp alternator on a 40 Pontiac and the instructions said to run an extra wire straight...
Nate, first let me state that I definitely don't believe in all the additives, booster, and performance enhancement gimmicks on the market but the...
First, let me come help you if it's only 95 in your garage; I'll pack some warm clothes to bring with me. Three things needed for a cylinder to...
There are thin plastic washers called escutcheons that are supposed to be between the handle base and the cardboard door panel to prevent this....
I like to mount a continuous duty solenoid (Standard #SS-584) in under the truck out of sight. These are used on RV's but don't buy on from any RV...
Neil, look this over and see if it's what you have in mind. Has finally cooled down to an artic like 102F (39C) so I bundled up and went down to...
Been a long time but I think there is a thin concave washer with three holes (<> 12mm) and three slots. If this washer is upside down or has lost...
No, that is the solenoid, the smaller one on the other side is the governor.
Laquer thinner dribbled down the stem will dissolve varnish residue from old gas that often is on the stem. Once free follow with a soaking of...
Most often referred to as BorgWarner OD units. The W.G. DIV. on the tailhousing in the first picture stands for Warner Gear Division. They were an...
Some of you have probably checked out the guys 10,000hp tractor which has some really facinating engineering but just not my cup of tea. For my...
Nate, have your next wish be that you never have to be near it when it's running under load. The floor vibrates so that it feels like your getting...
Just got back from the Volkswagen restoration shop a mile or so from the shop and the owners 1970 SS Chevelle show car was toast; electrical fire....
Nate, you are so right about engines needing heat. There are ones that will argue to their last breath that an engine loses power as it gets...
Yep, Neal, that's why I'm finding out what holds the bugger in. I'm under 50 percent on getting private message replies to actually reach the...
The parking light is different and there is an inch long flat spot where the side of the grill fits but it can be used with a little massaging.
Thanks, Chris. I should be able to take it off (the driven gear) from above with the trans floor cover removed. Now do you know anything about...
There has been remote master cylinder reservoirs on cars for years. I think Summit and Speedway would have them in kit form. Just a pint or so...
On a factory 4 speed trans in a 50 3600 what holds in the speedometer driven gear? It's caked with grease and I can't see if there is a clamp or...
Separate names with a comma.
