Measure from the front of the lip at the bottom of the front bed panel to the back of the "step" in the rear crossmember. Often the front panel is...
I have only done about a thousand 47-55.1 and my advice is to follow Ken's advice. Don't pay one damn bit of attention to dimensions given by any...
Owner said it was from a Chevelle. Fit between the fender aprons and had the fan in the right place. Did the nice touch of trimming the back of...
A 51 at the LeGrave Field in Fort Worth had a decent body and already converted to a V8 open driveline. If that is something in your plans it sure...
Here's my line of thinking: if, that's IF the Model A does as predicted then the AD will have many advantages. A few are the windshield is sloped,...
I have mentioned several times that I no longer allow myself any high speed runs and withdrawal has been tough. A customer is trying to get his...
There are several things that can cause over heating but since a 235 wasn't a problem engine I strongly suspect the radiator. The original...
Zig, scallops are easy to lay out but tricky to make look really graceful and regular. Narrow masking tape is pricey so get regular 3/4" and cut...
Like the old saying about missing the obvious, "can't see the forest because of all the trees being in the way". Does anyone else have those "Duh"...
If it leaves a gap when captured between the light housting and bracket you could trim the bell off, or use the other end, and then put a coating...
You can buy this set up from maybe Rocky Hinge or a similar supplier. If it's not them they probably know who does offer it. The $400 plus price...
I have one up in the rafters of one storage shed but I was thinking the center tie plate had a Bowtie emblem stamped into it. The picture...
You best find exactly what you have so you will know what to buy parts for like brakes and such but for the ratio just mark the pinion yoke, hold...
If you stay with manual brakes be sure to use a m/c with the same size bore or slightly smaller. A larger bore will give a higher pedal but need...
We built a 34 cabriolet and used a DuPont "Hot Hues" color called Blue by You (not bayou). Here are pics of it in sunlight and under flourecent...
I used a Borgwarner OD on a 68 and jumped the mileage from 12 to 16. It was an option when these trucks were new and fits right in place of the...
Try using the red high heat silicone in PLACE of the gasket on this one exhaust port or on the whole header flange. I don't believe in all the...
There are three cast brackets for the a-c compressor: one about 4" long that fits on two center intake bolts and has a threaded ear for a strap to...
Darn, Greg, you'd have to be sharp eyed to tell them apart. I always thought they just changed the name, not the color. Here is a Juniper green...
Been there so my thoughts are with you. Everything seems to be in slow motion and DON'T cough. My goal was to be able to get on my side since I...
Separate names with a comma.
