As I understand it cars/trucks must be 84 or newer and get less than 18 mpg. This would leave our collectable rides alone but I am always leary of...
Go to our hosts online catalog and see if they list seperate cables for the regular 3sp and the 3sp OD trans. I'm almost certain they are the same.
I made a hood spring removal tool by splitting a piece of exhaust pipe lengthwise. I think it is about 1 3/4" diameter by about 10" long and...
I'd start from scratch, they say these old clunks only take three things; fuel, compression, and spark. Throw in valves and ignition working at...
I have had good luck backing the nut off just several threads and then use an impact socket I've welded an old air tool punch onto the drive end...
Ken is right, you kinda have to go with the fit of the filler panels that go between the top of the running board and the bottom of the bed side....
That tech advisor needs to go into another line of work. Just as Bill said, current needs to flow through the ammeter for it to register. There is...
Boy do I have to eat some humble pie. That 5/16 bolt advice is really great if it was a 55-59 TF truck. The AD lower bracket is held by a screw...
You will need to take the 2 or 3 screws out that hold the vent frame to the door frame (usually phillips head) plus the one or two that are at the...
Is the hollow head bolt in the right place? It goes just inside the valve cover midway on the passenger side and inline with a small pipe plug on...
Think FORD. You don't have to have the manifolds joined to heat the carb although I think it is the best method because the heat is tranfered down...
GET A FIRE EXTINGUISHER. Been messing with the old cars and trucks for 60 years and never needed one till this week. Was charging a high dollar 48...
The gears CAN'T fall out unless you rotate an axle till the gears are lined up with the windows in the carrier. I usually do this to get them out...
Ken, that is a beauty. The 30's were when styling really came into it's own and GM, Ford, and Chrysler all had some memorable cars/trucks. Before...
Sometimes you just have to go with the flow. My wife wanted a fishing truck but says AD's are ugly. Would have had a come back but learned my...
Here's another entry for your dictionary of useless facts. A lot of people are using crate engines now for their V8 conversions with the Ram Jet...
Bruce, you need to flag this for Ken's 50. He will most likely be able to come up with the part #'s.
I always use a wiper arm removal tool. Mine are off the $2.99 rack at the local parts store but all the tool people like Mac's or Snap On have...
Remove the door handle, roll down the window so you can pull the door open with one hand while you poke your finger through the door handle hole...
This is all wrong. Sure we do some real adaptations but advice from me compared to Nate's is like apples and oranges. Nate's is real world stuff...
Separate names with a comma.
