Pictures are posted from last nights show already. Here's the link Steve:...
Quit picking on me Ken. That truck has been my only ride (except when SWMBO lets me drive hers) since March of 1990. By the way, just got off...
Mine was pulled apart mounting the power steering that weekend. Had to show up in the wife's Acura.
The first Saturday night "Krogers" old car show and shine is tomorrow, Saturday Mar 10 in the Krogers parking lot on the corner of Spring-Cypress...
I know that the TF trucks use a 30 ohm full, 0 ohm empty sender. I think the ADs are the same.
Have a friend who is looking for an H050 rear end complete with all parts, drum to drum. The 3/4 ton 55.2-56 GMC truck rear axle was called...
I don't think any bit measured in MM would fit in any drill Nate has.
Funny you guys should bring this up today, the 38th anniversary of my getting into the computer business. I work with mostly thrity-somethings...
The cable TV guys use really long drill bits. I found a 3/8" bit 18" long at Home Depot. Gotta go. 2" new powder awaits on the mountain....
I know the TF beds are different, but they still use the thru bolts with the offset washers. When I redid my '57 bed I didn't use the thru bolts...
Manual. Plenty of stopping power without the booster.
I added disk brakes on the front of my daily driver GMC and a dual master cylinder. Best thing I ever did to it.
No resistor used with a GM HEI. My guess is that Pertronics doesn't use one either, but I wouldn't be my life on it.
Other way around. If you ground the wire going to the sending unit the gauge should read empty. Disconnected it should read full.
Hollander's says the 1/2 and 3/4 ton front spindles are not interchangeable.
Pick the right weekend (not before late March, I'm skiing next week with friends and the week of March 10-16 with my daughter's family) and I'll...
According to the 1955-59 Chevrolet Truck Assembly Manual, RPO (that is Regular Production OPTION) 237 Oil Filter was available for both six and V8...
Mike: What was your reason for switching? I've considered the rack and pinion kit that mounts to the stock straight axle and wonder if you have...
Sometime in the '60s GMC and Chevy 1/2 ton trucks started using 5 lugs on 2WD trucks and 6 lugs on 4WD. Stayed that way for a long time, maybe...
My '57 GMC (with a left front hub from a '52 Chevy truck) is sporting a set of mid '70s 15 inch rally wheels from a 4x4 Chevy and 235/75 tires....
Separate names with a comma.
