Welcome, You need a rear end that is 60-62 inches wheel mounting flange to wheel mounting flange. Camaro and Firebird are correct but you...
I have done several V butted windshields and liked the looks. They were sealed at the joint with clear silicone and didn't leak but did have the...
We put the first 47-53 one piece windshield in today that we've done. Have seen several at car shows and they seemed to have quite a bit of...
Sixteen out of 26 so far (with a little journalistic license)---not bad.
I like to spray with a urethane primer and let sit for a long period for two reasons; one it is moisture resistant , two it gives the primer time...
I think our host offers unpunched angle strips, or if not Mar-K does. We always use these because the holes can be drilled EXACTLY where needed....
18g cold rolled is a good choice, it is pliable enough to work and yet it holds it shape by not being as springy as the thinner guages. Thin...
The web master might scrub this but then maybe HE'S interested or even our site host is. I've often wondered what everyone does in the real world...
Oops, the steel line runs along the right frame rail to the REAR.
A couple things you might check are to visually inspect the drum to see if it's been turned and a ridge left on the inner edge where they didn't...
How much of a fender do you need? I have a 53 that a new land owner gave to me after pushing it around several times with a tractor with a bucket...
You hit the nail on the head when you said you probably needed to look at an S10 mount in person. My text descriptions are fuzzy even to me. A few...
Saw this at a car show today; never thought I would use "pretty" and "longbed" in the same sentence. It is optioned to the hilt (don't overlook...
Andy asked about perhaps switching to solid mounts to get away from the shackle type rear mounts that have been giving him fits. We have done...
Geeze guys, I keep looking over my shoulder to see who the guy is that's getting all the nice things said about him. The reality of the situation...
Ken, a couple of $.02 worth of suggestions. To save his cab run a couple of nailed together studs (they're only $2 at Home Depot) through each...
I think the magazine "Classic Trucks" had an article and photos on this. You might try contacting them and see if they have a way for you to get a...
Here is one approach for hooking up a charger to a truck with an under floor battery and a sealed on battery box cover. A piece of copper tubing...
Just got back from the Chickasha, OK., swapmeet and actually found one guy that had brought a couple vehicles to SELL. I was about to give up...
How many do yo need and where do you need them at?
Separate names with a comma.
