Here are a couple of ways we work with a problem like you have. If it's already painted go to an upholstery shop and have them make you some welt...
Bill Hirsch(www.hirschauto.com) offers a complete line of engine paints, maybe he has what you need.
Think about what Nate says, by the time the air fuel mixture gets to #1 or #6 what happened at the carburetor no longer applies. As the mixture...
RE: 'BearClaw' Latches Nate, all my customers seem to want their trucks all hooty tooty which is fine and what we're in business for but I'm...
Nate, when will I ever learn? You always come up with a simple low cost and probably better solution to these old pluggers chronic problems. Here...
Bossman is right, there is no antifreeze in the capillary tube. The old mechanical guages used a Bourdon tube, the little banana shaped brass...
Kent, as a guy that worked in research chemistry before I went insane at retirement and started messing with old cars and trucks I can give you a...
Eric, if you have to drive the truck to the painters you can remove the speedometer but it would be better to push the instrument cluster back out...
1/2 ton gates interchange.
Center vent Attachments: https://talk.classicparts.com/images/attachments/442cd97a0a9c5b9d.html
RE: early Simply not necessary, 1.75 will work fine, and would actually be better because the machine shop can use a 60 degree cutter to move the...
If there is a tool rental place near you you could rent a gas or diesel powered compressor for probably less than a $100 for a day but your siphon...
I know places like Terrill Machine has them but usually a bit higher than regular parts stores. I think TRW and Manley still offer them. If your...
Dave I have a 63 radio. It's condition is fair, the chrome face that sticks through the dash has several pits and part of one knob assembly is...
When we type in "Chevy Duty" will it still bring up this site or will we have to start using the new name?
Like the man says, there are four bed mounting bolts that run through washers that are close to the steel strips, two in front and two in back...
Mike, I think your question was what system to go with and the ease of installation not how tough you were to take Texas heat without A/C. If...
Jesse, do you want to keep it all chevy? If not, there is a whole smorgasboard of inline performance engines out there. Several that come to mind...
I guess we've all been through this with our first 216, worried about oil pressure. I've had several that would be just barely off zero at driving...
The flash of your timing light lets you know where your #1 is firing in relation to the crankshaft position. If it will line up on the BB your ok...
Separate names with a comma.
