RE: Stock temperature gauge/sender You can still buy a temp sending unit for your truck and if you have the correct unit the resistance should be...
Does anyone know if Clifford Parts is still in buisiness? For years in the car magazines they had six cylinder speed equipment advertised And...
RE: Restoration Shops Rick, I think you made a good choice because the almighty dollar is taken out of the equation to a degree. Still check on...
A couple tips--use .o23 wire in your mig, it will give a dense weld at a much lower setting. Use self drilling #8 screws to make it a one step job...
RE: Restoration Shops Nate is right, get at least half a dozen references. If they can't provide that many they are just starting in the...
Are you sure your driveshaft is in good balance? A crossmember won't cure a vibration problem by itself. 55-57 chevy cars and 55-59(maybe more)...
RE: tailgate Chains Are you going to use the tailgate and do you want to keep it all stock? If answer is no here are a few options: (1) use a...
Thanks guys, have a 63 in shop that is rusted away on one side where rear brace joins hood side. Have access to 65 hood but didn't know. Our shop...
How many years will interchange with a 63 hood? Thank you
ttcodi is right. Ive done some in the shape you discribe because it was dads or grandads truck and there was no subsitution allowed. It is...
If Dallas is closer you might try Southwest Wheel. They used to sell rims only, many widths, and centers only in many bolt patterns. You could buy...
Garya--be aware that the mounting points also figure in big time on the cylinder rate. You probably already know that the closer you mount to the...
Finally got off my backside and weighed a hood. It is a 54 but should be nearly the same for all. 48 pounds.
Last week we did some paint work for a customer and drove his ride back to him when finished since it was right on the way home. It has a bone...
Even a bandit radiator shop shouldn't charge over $20 to move your straps. If you do them yourself a small propane torch will work. They are...
Ken, don't take this as gospel but I think you can put 235 bases on you 216 bodies. The differance was in the base and throttle plate size. The...
RE: Conversion 6 lug to 5 lug on re You might need to check out Moser Engineering in Portland, Indiana. They redrill axles and drums for like 20...
With or without the emblem? I'll pick one up and step on the scale tomorrow.
This question has been asked before and the answere was to look inside the curved part of the cowl. There is a brace there thar will have the...
If price is not a consideration there is only one--Vintage Air in San Antonio. Chisenhall and his crew probably do 99% of all the R&D on air...
Separate names with a comma.
