We'll forgive you only if you find some footage of our trucks being built....
From what I have read, either could have come from the factory. The oil bath could be ordered for heavy dust conditions, the other for more urban...
Make shure that the coil wire is in the right terminal on the switch. It sounds like it is not recieving power in the crank position. I don't...
for what trans?
Good to hear you are back in action. If you missed the swearing in, there will be plenty of swearing at in the future.....there always is.
I have one sitting in my garage. I'll try to post a pic this weekend.
A company called spring services in Charlotte can make them to your spec.s,and their rates aren't as expensive as you might think..
Nice to see another nc man. You should come down to the run to the sun in Myrtle Beach march 19 weekend. Come find me.
The assembly manual from chevy says to do it at the top. Actually, at the bottom, water sits on the glass at the rubber, then has time to leak...
Most GM slushboxes should bolt up, however, the length of the input shaft is the deciding factor. Take lots of measurements and check the tip of...
I thought those were vented caps. If not, make shure you run the vent up higher than the fill cap so you don't have a leak when you fill 'er up...
The batt wire from the generator or the alternator should go tho the left post of the ammeter, then on to the starter from the right post.
Doors can be a pain, and now is the time to correct any fitment problems Chev left in the door opening gaps.
I used a thicker metal paint scraper blade, wedge it between the panels and whack the snot out of it. It busted more than about 90% of the spot...
Check with diamondback tires...www.dbtires.com..I run them ONLY for whitewalls. Had some cokers, not impressed.
Ahh, hell, I'm 36, no head injuries, and I still can't finish sentences. Don't feel too bad.
Nah, that spout is big enough that the gas can get in and the air can get out. No vent neccessary.
Feel free to view my buildup pic.s on my 3 trucks to get an idea of what goes into it. Ask any questions you like. Russ...
Pipes out the side.... [IMG]
I have Dynamat and aluminum backed jute, and you can still hear 'em. 'Course, the flowmasters are mounted directly under my seat...........
Separate names with a comma.
