I believe a 7004R will bolt up with minor mods, such as a new crossmember, any 67 to 72 truck or suburban will work..you need to shorten...
Just thought I would link this for those that want to upgrade, I`m out of my realm on this side of the tracks but this would be a viable source...
Well its almost done, just got to run the line and filter and set the bed one, just need to round up the muscle, all the young bucks....;) Note...
Have you checked your centrifical advance in your distributor, check your vaccum advance as well, it sounds like either broken or missing springs...
If it had power brakes it was mounted next to the rad as shown here, if non power brakes was ordered it resided inbetween the master...
You are correct David, just under the c-10 badges, ( they may or may not have shims under the brackets/bolts don`t lose count of them ) you can...
#2 The wiper motor is in the cab at the firewall up behind the radio. if you have a radio. ( you may have to remove radio and or speaker } to...
My bad Nate....I thought that was one of the few things they did share...:confused:
David welcome to the site, its nice to see distant people here...to your question on the wipers, if you want the original style washer pump/switch...
Here`s a pic although not original it could be purchased as a unit to install on your engine......
That works Nate...we`ve alays just set the timing marks, plug in the timing light, turn key on and rotate dist ( correct rotation on #1 )until...
Thanks for the link John, thats sorta like I was describing, my issue is now I have the sway bar in that location, done but not installed or holes...
Just thought I would share this info for those that needed this...concerning shocks....... Thanks BOH......, been searching after I bought,...
I think that is the direction I`m headed as well... Back to the overhaul, had to order new shocks so I did all the measurements and want to use...
Great pics Allen, as I had said before if this was porn you had made the centerfold..... :D
Yes what he said....:D
Contact the MFG maybe you can get the remote..
I`m using the one from Bob drake as seen here.. http://www.bobdrake.com/ItemForm.aspx?Item=C4952-9200 you can also get them at ........
First question is have you actually flushed the tank, is there crud in it to begin with, if there is you`ll never get it running right..it will...
Twister you got one sweet ride...hands down..;)
Separate names with a comma.
