Shortbed is correct, you`ll still have to pull out the old crossmember, you have two options, for both th350 or 7004r, get a cossmember from an...
Correct...!
The shorter the bar even for street applications would result in a quicker off center axle alignment, I would go with a longer bar or factory...
The wood is normally routed or notched on each side for the metal strips to better hold the wood into place. We are only talking about an 1/8th of...
New springs will settle in, usually 1 to 1.5 inches over time, you can speed this up however by carrying some weight around with you, maybe a...
If you can`t peen it over can you fit a flat washer over it and touch it with a mig welder????:eek:
Use a four inch grinder or a dremel and grind the rivets down flush with surface, tap gently with a punch.....
So you have a `66 model year, looks as if you`ll need some replacement panels..LMC has most everything you`ll need, not sure if they repop the...
Actually just as easy, look at the inside of the cowl panels or the fenders to see if the holes have been filled, there will be some indication on...
The biggest problem with rebuilt carbs is the builder, ( Knowledge ) there are a couple things to consider, miliage on the carb will wear out the...
Kris the `65 model had the badge on the upper cowl panel, the `66 model had the badge on the lower fender just below the fender beltline, the...
If the gauge is original to the truck the sending unit should be 90 ohmns, GM changed to 90 ohns for that year, `65 and ealier were 30 ohmns, when...
John I kidnapped that photo, just plain sexy...
Yes you can but should be boxed with a thru tube for your exhaust, this is a stress point for your suspension.
You`ll need to change flex plate with a dual pattern one from summit, either buy new or used trans crossmember from a suburban `72 to `85, remove...
Tony I believe on Nastie`s Z site it shows that in that section marked A those engines were used for all chevy vehicles, not specified.
V0605DJ = Flint plant, June, 6th day, 283-195 HP, air injection...go to the back driver`s side of the block below the head there will be a julian...
Here`s another
There is two alternatives, first one is using brake fluid, pour two quarts into tank seal it up and shake about every four hours leave in tank 24...
Hey we all jump from site to site....welcome back;)
Separate names with a comma.
