I just saw a thread where a genlemen used a `51-`54 chevy pass car tank under the bed, no modifications where done, its 16 gallon, offered thru...
You`ll gain about an inch, your headrests are against the back of the cab now if I`m not mistaken, are you talking about buckets, I have the same...
keep in mind that the Tank (its a blazer tank) will hang down as low as the rear axle, maybe a little further, if you`ve lowered the truck you may...
If you have a sheet metal near you, give them some demensions and what yo need for inlet and outlet, and get a quote, but your asking for a water...
Just saw this on another site, yes they do, but they are only 16 gallon, but there are other alternatives, 1970 cuda and challenger tanks will...
Sounds like maybe your not getting full pedal travel into the master cylinder, which will mean you`ll never get them pumped up or full brakes if...
373 posi as denoted by the HC , warren plant as by the w, but I only see three digits for the date code here should be four....either `62 to `66....
ECE sells one for the 60 to 66, inch and an eight for the front, one inch for the rear.
The round two go into the front outside corners of the hood, ( they slip over adjusters to set the side gap ) the two square ones with the lip go...
The spring attaches the outside of the ring and to the back of the of the support bracket behind the ring.
Is this an original brake light switch, it may be dirty inside, work some w-d 40 into the inside and try it again, or try a jumper wire on the...
Note if using the rear motor mount holes, so that the distributor is close to the fire wall, you`ll have tranny / body interference at the seam...
[IMG] Bumper and filler panels, bumper will sit one inch behind rear panels.
One quick way to set timing, remove coil wire, ensure #1 is on firing order, and set at what ever timing mark you want, drop distributor in,...
keep in mind that the Torker manifold is a high RPM manifold, low RPMs will not respond well, and if your buying new valve covers you will not...
Have you guys tried it..?? it works well. http://antique-engines.com/electrol.asp
Separate names with a comma.
