The holes for the heater core are in different places, and there is a large hole for the evap core that a non a/c cab will not have. You could...
The bolt in the engine bay allows you to disconnect the engine wiring harness from the cab harness. The two bolts inside just hold the fuse box...
You can buy the stud for the upper control arm from Classic Parts. I replaced mine when I rebuilt my suspension a few years back, one of them was...
Bucket seats from a '73-'91 Burb or crew cab will fit with little work. Just need the front inner seat mounts. I put a set in my truck a year...
Might also want to check the frame by the steering box for cracks, pretty common problem.
There was a slight change in frames in '76 or '77 for the floors between the front and rear seats. I think you need a '77 to '91 frame.
I think the frames on the newer body style are wider, so you might need to fab up some new bed mounts.
Might help if you post up engine, trans, and gears if you know them, as well as current mpg. These trucks don't generally get good fuel mileage...
Actually, 6.2 diesels and 350 gassers are direct swaps and use the same motor mounts and trans bolt pattern. You just need to get the wire...
Most of the parts for '89-91 R/V series are the same as '81-88. Unless you need headlights, grill, or trim; the '73-87 catalog should have most...
If you have the donor truck, you may want to grab the motor mount brackets. If you have the money, you may also want to rebuild the...
I believe the correct way is to remove, or at least move the front fenders. This will give you access to the hinge-cab bolts and let you see how...
Saw this about a year ago on a 4x4 forum I frequent, might give you some ideas. Frame off restore of a Blazer converted to RHD [img] rest...
pm'd you about pics. Is the axle you installed the new one with the 11.5" ring gear? And do you still have the 2wd suspension brackets on the...
Remove the dash pieces beneath the steering column and you can get to it. Just to the right of the column. It has a 2 wire connector, one white...
When you get the other quotes, I'd ask them to show me the parts they want to replace and tell me why. My sister almost got burned by...
My '85 was stock 4.3L/700r4 (OD auto) with 3.08's when I bought it. I used to get 10-12 city and 15-17 highway. Not that great for acceleration,...
Another thing you may want to look into is getting an engine crossmember/brackets from a big block pickup, although I'm not sure if they're...
I did the reverse swap last year. Yes there is a fair sized hole behind the evap core and iirc, one next to the fan you will need to cut for the...
33's will fit, but if you do any offroading, watch to make sure they don't rub the fenders.
Separate names with a comma.
