Sounds like the switch, you could check the local junkyards for a switch/delay module to test it.
PM sent
RE: Trying to lift a 71 2wd chevy p Rodeo69 is asking about a 2wd lift which is much different and harder to find than a 4wd lift....
Have you checked the stoplamp switch? (There's a bracket bolted to the pedal that makes contact with it) If only the brake lights are out that...
RE: 77 chevy truck, where get parts Plenty of good trucks get thrown away here in California. You can find good body panels in the junkyards or...
I'm not sure if 3/4 ton 4x4's had the option of crew cab in the late '70s and '80s, so your best bet would be to find a '77 and up 1 ton 4x4....
You should probably start with new weatherstripping for the entire cab and sound deadener for the floor and firewall. When we replaced only the...
If you have to get it from a yard, I'd try and get it from one that will take the part off for you. I just moved the rear shackle hanger on my...
They look like they could be seperate parts (from looking on the back of the knuckle), but I've never seen a 2wd spindle or knuckle sold...
For the paint on the dash pad, look for plastic safe paint stripper at a hardware store, then scrub it well with a tsp solution or denatured...
You can use one from any '73 to '86 Suburban or Blazer. Here's a pretty good write up on how to do it:...
[updated:LAST EDITED ON Jul-11-05 AT 02:36 PM (CST)]I just upgraded my C10 to 3/4 ton, now I need to clean up the yard. 10 bolt w/ 3.08's,...
The 700r4 is a few inches longer than the th350, so you will need to shorten your driveshaft, and I think the th350's crossmember is slightly...
I dont know where to find an aftermarket a/c unit, but if you find someone parting out a Silverado or go to a local salvage yard you can take all...
Acceleration depends a lot on what transmission and rear end gears you have. My truck (700R4/3.08's) accelerates a lot like yours, so you...
sounds like a bad ground between the switch and the sending unit.
If you really want the tilt column you can rebuild it. But if you aren't looking to do a lot of work you can put the '85 column in. The 85' has...
Start by checking the small things: fuel filter, tune-up, etc, before rebuilding the carb. Also, is it sluggish only when the engine is cold, or...
Go off the VIN, 10th digit (second to last letter) B = 81, C = 82, D = 83, etc.
If you don't want put a lot of effort into fixing your column, then a junkyard replacement will probably be the better option for you.
Separate names with a comma.
