Not Batt unless you put a fuse in the wire to the dome light as close to Batt terminal as possible. Head will only have power when the headlights...
How about the stuff that the guy on TV uses to waterproof his boat with the screen door in the hull?
I did it Evan's way when I did my '57. I didn't know about the pop-up caps, but I used a stainless screw cap. Had a muffler shop bend a custom...
I'd guess that if it were above the frame it'd be through the engine.
I agree, BUT .... Until Craig decides what lamps he is using he won't really know what his load will be.
My experience (and documentation) is with a 51 and later GMC, but I'm assuming the Chevies are the same. By then, the headlight switch had a...
There is if you have ... a working battery a load, like a heater fan motor or even a brake light lamp the ammeter some 16 gauge or bigger wire...
First, that is an ammeter, not a voltmeter. The easy answer is to hook the battery to one side and the rest of the wires to the other side. Turn...
Depending on the year of your 216, you are looking for three of one of the last two items shown below. [ATTACH]
I've never seen one with "off" in the CCW position.
Shouldn't need a relay if you are just going to use a push button before you start the engine. Wouldn't even need to hook it to ignition. Tap...
Don't need the relay if the switch is rated for as much or more than the pump requires.
You can. Mount the electric pump near the gas tank outlet. [ATTACH] Places like Jegs and Summit have them.
Cars with factory electric fuel pumps have a "roll over switch" that cuts power to an electric fuel pump if the vehicle gets too far from straight...
Evan: Any chance you have a LONG wheelbase late 40 to mid 50 Chey or GMC truck enclosed driveline lying in your scrap pile. I know a guy that...
A Turbo 400 has the same 1:1 high gear ratio as your stock '57 Chevy transmission. Therefore, engine speed would be the same at highway speed.
Forgot to put it in my earlier post. The spring wire was 0.055" diameter on both springs.
First, let me say that I have no idea if my springs are original equipment, but the pressure required on the gas pedal seems reasonable to me....
GMC specific, although the Chevrolet Master Parts Catalog for 1929-1954 lists all models of 1937 Chevy use the same 593599 spring. Its...
Separate names with a comma.
