I think I know what your problem is. The pictures on your computer have to be up-loaded to a web page. Most Internetnet Service Providors (...
Thanks ! THIS is what the outside looks like as of yesterday. Not too pretty, but a month from now,,, look out !!...
>How can you tell if you have a 2 core or a 3 core >radiator?:-) Heather, If you look at the top of the radiator, see how the radiator...
I forgot to suggest the first thing. Eliminate the heater core from the equation. Take a short piece of heater hose and loop it from the...
There is USUALLY no reason to go bigger with than the stock 3 core radiator if you are using a small block V8. A big block would probably be...
This won't answer your question, just an opinion. If you plan on converting to disk in the future, save your money. A booster won't improve...
Suggestions: Have you checked/replaced the less expensive items first ? Is the motor tuned-up and timed properly? Hoses too soft ?...
[updated:LAST EDITED ON Jul-28-05 AT 04:24 PM (CST)]You can replace those with Factory mirrors. Our hosts here at ChevyDuty can hook you up....
Yes, check the ground. Given that the truck has sat for a few years, it is most likely the sender itself though. There is a small wire that...
OK.... It works.... ;)
http://home.comcast.net/~dennisvalentine/wsb/media/446492/site1016.jpg
[updated:LAST EDITED ON Jul-25-05 AT 11:38 AM (CST)]"I'm afraid "Image Pasting 101" isn't going to be enough. I'll figure it out though."...
Nice truck Heather !! See how the link ends with HTML ? Go back and list the properties by Right clicking " ON THE PICTURE ". The file in the...
Eastwood has a line of products Including a kit for polishing intake manifolds. http://www.eastwoodco.com/jump.jsp?itemType=CATEGORY&itemID=432...
The Lokar trans mount shifter should work fine. It is adjustable so you won't have trouble clearing the bench seat. I have one in mine on a 700R4...
Go back to MSN where you have the picture. Bring up the picture and RIGHT Click on it. At the bottom of the window is a title PROPERTIES. Click...
Karl, Have you set the distributor timing properly ? DV
Did you do ALL of the following ? Attach that connector to the BAT connection of the HEI. Run the wire through the firewall through an existing...
Here ya go... http://home.comcast.net/~dennisvalentine/wsb/html/view.cgi-photos.html-.html
RE: 700 R4 Passing Gear Cable or Ki One more thing, Because these trans came from vehicles that used a computer to control the torque...
Separate names with a comma.
