Have you lubed the front end recently ? Bushings, ball joints, tie-rod ends and idler arm. If you have a sway bar in front those can get...
[updated:LAST EDITED ON Apr-30-04 AT 04:47 PM (CST)]You are sorting the display of messages by something other than Date. When you enter the...
Hi Fu ! First off, Get the Factory Service Manual for the 1963 and the Suppliment for 1965. Other important reference material is the Factory...
Have you tried calling a NAPA auto parts place? I don't think that there is much, if any, difference between the 60's and early 70's. Ask for a...
[updated:LAST EDITED ON Apr-25-04 AT 09:24 PM (CST)]You don't need to convert to disk brakes to go to a dual bowl M/S. A 70's GM truck...
RE: Crossmember for 700R4 transmiss From our friend Van Pershing's Idea Page. 83 Suburban crossmember....
RE: Disc brake/power steering conve Yes it will fit. BUT, do your homework first. How much will it cost after you rebuild everything you are...
RE: alternator not in line iwith wa Rusty, If it's out of line by as much as you said, 1/4 inch, then it has to be the wrong bracket, wrong...
Hi Rusty, Nothing you can do but scrounge a cab that still has that part intact. If that part of your cab is shot, check the hinge pillars...
"you might reread the original post. It reads ROLLERS not regulator" Oops !! (sorry) ;) DV
[updated:LAST EDITED ON Apr-20-04 AT 06:14 PM (CST)]>Hi There! I'm A new old Chevy truck owner. Just bought a >1965 K10 longbed fleetside,...
[updated:LAST EDITED ON Apr-20-04 AT 01:33 AM (CST)]I forgot to answer your question A.J. My way is to first make it safe, brakes ,...
RE: alternator not in line iwith wa [updated:LAST EDITED ON Apr-20-04 AT 01:27 AM (CST)]Is the water pump pully a one or two belt ? AND, is...
Welcome to the forum Paz ! Dennis
[updated:LAST EDITED ON Apr-18-04 AT 01:08 PM (CST)]I can't help on the patch panel. I've never seen any hinge pillar replacements for our...
[updated:LAST EDITED ON Apr-15-04 AT 06:48 PM (CST)]HAY ! Chris ! Fancy meeting you here !! ;)
The part that is rivited to the top of the frame rail is not reproduced. Unless you fabricate a piece yourself, you would need to find one in a...
Sadly you are correct. The REZ adapter sold here is for two wheel drive. I don't know of any for 4 X. But my knowledge of 4 by's could fill a...
Hello Lil, Welcome to the forum. The problem with the clutch ? Is it the Z-bar? The Z-bar runs from the engine on the lower left side to a...
That is a great 61 !! Here is another neat ride of a friend of ours ! ;)...
Separate names with a comma.
