"Is it not lined up with the catch properly?" That's what it sounds like. If the latch isn't aligned correctly the door will act the way...
If you are unlucky,,, our friends here at Chevy Duty can hook you up with a new window regulator... Dennis
Don't be too hard on him, it was probably the first time he saw a window crank !! Before you go ordering parts, pull the door panel off for a...
RE: 1965 C10 Long Fleet Break Switc Hi Kevin, I don't have a picture BUT, It's mounted near the very top of the brake pedal arm under the...
Pull the dipstick out and try and see if the OLD O ring ( from the previous dipstick) is still in there. If so, "carefully" remove the old O...
From what you said here, it sounds like ignition problems. If you are using a HEI distributor where are you getting 12v supply from? Check...
If you have a 4 speed manual with the compound low first gear, it mounts on the shifter handle below the boot. Dvalentine
Hello, You didn't mention if you still have the six cylinder or not, Or what transmission you have ,,,BUT... Your truck probably came with...
RE: Looking for a lot of specs for http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2446383923&category=6760 HOW REBUILD SMALL...
I don't have the answer for you. BUT, don't let making a mistake in buying it stop you. That's what Swap Meets are for !! Correcting buying...
Hi Zane, It's difficult to tell exactly what could be wrong based on your description. It sounds like the carb is the place to start though....
RE: Power Steering Conversion on a Check out this article from Custom Classic Trucks. What you MUST do is pick up a REZ Engineering kit. The...
I would say that a fuel cell is primarly used in a race, or pro street, tyoe vehicle. They are usually mounted inside the trunk or other area...
"I think the stock one puts out 50 or 65 amps. The one I just put in puts out 100 amps, so it stands to reason that it would cook the wire going...
[updated:LAST EDITED ON Oct-20-03 AT 12:46 PM (CST)]>DV, > > I didn't change any of the wiring. I just assumed the >wiring was good...
Did you use at least 10 gauge wire from the BAT terminal to the positive (+) post of your battery? DV
It's just me, but I feel safer moving 16 gallons of highly explosive liquid further away than 4 inches from me inside the small confines of a...
Is this a one-wire alternator? Or do you still have a voltage regulator in there? Dennis
[updated:LAST EDITED ON Oct-18-03 AT 01:01 PM (CST)]>I thought I could just change the spindles witht the disk >brake.That I'd just unbolt...
Yes, it is true. It's a complete crossmember swap, and is a bolt-in. The idler arm will need to be relocated, but that's about it. Look for a...
Separate names with a comma.
