Hay Fred, I think "most" of the consoles you will see, ( the nicer ones anyway ), were custom made. I've seen some taken from cars that were...
> HEY DO YOU KNOW ANYONE WHO HAS REDRILLED THE FRONT BRAKE >DRUMS ON 1964 PICKUP TO CHANGE FROM 6 TO 5 BOLT WHEELS. THE >PLACE I WORK THE GUYS...
[updated:LAST EDITED ON Feb-18-03 AT 01:31 PM (CST)]If you do this using old "yard" parts, be sure that you have everything checked and...
>Try checking the half moon connector that leads to your >steering collumn, I was working on my wiring a while back >and I noticed if I...
90 % of the parts from trucks will work on your burb. Where you run into problems is with the unique parts like , rear doors, or side sliding...
Have you seen this yet ? http://www.geocities.com/vpersh/GasTankBelow.html Dvalentine
I knew I had a link to this http://www.geocities.com/vpersh/Tach.html DValentine
If you can find one that has a 90 degree display ( top half only) and the correct size, you can add a factory looking tach in the gauge cluster...
I'm not sure about the location of the casting numbers. The service manual has a picture of each motor. The 292 CI has an oil filter that mounts...
[updated:LAST EDITED ON Feb-14-03 AT 01:45 AM (CST)]Read THIS http://www.physics.uoguelph.ca/tutorials/torque/Q.torque.intro.html The...
http://www.earlyclassic.com
"Torque - The moment of a force, a measure of its tendency to produce torsion and rotation about an axis, equal to the vector product of the...
That 4 speed is mounted by 4 bolts on the bellhousing. That e-barke mount is between the frame rails as you described and has two rivits, per...
[updated:LAST EDITED ON Feb-09-03 AT 01:21 PM (CST)]Well, if it's like my 64 panel, there is no crossmember for the 4 speed Granny...
I suspect that the cab mounts are different. But, Go here http://www.favorites.com/~jolly/6066GMCClub.htm And start looking for an e-mail...
That information is incorrect. The 60's do, in fact, use the motor mount for support.
Hi Rav ! If you are still having trouble with bolts, Swap out the PS support for an early 60's model that does not use the motor mount for...
If the block casting numbers say it's a 283, then it's a 283. Remember that the heads and almost everything else from a 327 will swap onto the...
Hi Travis, I have swapped out my old 64 column for a 72 tilt. It does not have the ignition on the column and looks factory. The entire thing...
[updated:LAST EDITED ON Jan-28-03 AT 07:58 PM (CST)]Hay Grunt, To make that switch, look on e-Bay for the complete dash cluster. I think...
Separate names with a comma.
