Hay wires. You said you have the service manual right? Read the instructions for transmission removal. Aside from the part about the cheezy...
[updated:LAST EDITED ON Jan-17-02 AT 03:45 PM (CST)]I've just changed the Granny 4 speed in my 64. That transmission rivals ANY automatic in...
Measure from inside the yoke on the 700r4 to inside the yoke on the differential. Take that measurement to a shop that can make you a new drive...
ALL manual transmissions, including the 4-speed heavy duty, mount to the bellhousing and to nothing else. The automatics require a crossmember,...
Look for mid-70s truck and van columns. They will go in with a minimal effort and very little fabrication, (if any at all) needed. The 4-way...
http://forums.chevytalk.com/forums/Forum43/HTML/000678.html :)
I sent you an e-mail today Speedball. My eagal eye spotted the absence of the e-brake handle under the steering column and I assumed you went to...
Speedball, What did you do for an e-brake after the swap? Did you go with a foot operated e-brake? but more important, how did you resolve the...
If you mean between the frame jobs,, ##### carries them. But I would NOT recommend them. They hang way too low for safty. You can go the custom...
Hay Speedball. I've admired your truck for close to a year now. Very nice work indeed.. I also visited my old friends at Early Classic's web...
I like your idea of ghosted flames. If your brother-in-law don't, move to Sacramento, I have a 64 panel that is a blank canvas...
If fuel line is kinked fix that, change fuel filter. Verify timing is set to specs. Check plugs and wires. (don't forget the coil and coil wire)
> Also how can i move the engine forward to make room for my hei dist. any info >helpful thanks,monk :) If memory...
If it were me..... I'd look at the 700R4 from a late model TRUCK only. This will give you freeway speeds between 2500 to 3000 RPM. (Your's is...
I've been here a long time. Just don't get in very often anymore.. DV:D
>I am trying to get the speedo out of my 60-63 truck I have >removed the screws in the dash.Is there anyhing else holding >this thing in it...
Searching other boards for an answer huh Raven ?? I am crushed ! LOL The clutch should start grabbing when the pedal is about 1/2 inch off...
I too used the Early Classic kit and Rez adapter plates. The Early Classic kit has stock and 2 1/2 inch drop spindles and both six and five lug...
It will fit, but it will also be tight. If you are just putting the motor in, move the motor mounts foward one bolt hole. You will need to...
Separate names with a comma.
