Hi Will, This is some of a site maintained by a fellow ChevyTalker, http://www.geocities.com/vapershing/crewcab.html DValentine
You are out of luck, no kit is made. This is a common problem on our trucks. Frequently it goes unnoticed. The damage that results can be found...
Hay Cowboy, My opinion ? You will be the one looking at it. If you think it's cool, then cool it is. Do it for yourself buddy. DV
Jury is still out on the 80's years, but the 70's years will bolt right in. DV
>I'm 16 and i can get full coverage on my 61 for about 145$ >at farmers insurance. do you think that is a reasonable >price considering my...
[updated:LAST EDITED ON Oct-10-02 AT 04:54 PM (CST)]Restore ? Modify ? Personal choice. If you already have a "Numbers Matching" 55 and...
Search e-Bay. There is one out there now http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1866724244 Dennis
I think my final decision would depend on the condition of the BODY. Go over the body closely for rust. The usual places are the front fenders,...
[updated:LAST EDITED ON Oct-09-02 AT 01:19 PM (CST)]Yup, both of those are correct. When this happens on its' own, (gas gauge pegs to...
>I agree with dvalentine, your TH350 wont last too long with >a 496. > I think he was referring to a Standard shift 3 speed. The TH350...
The mounting screws need "cage Nuts" to be inserted into the panel to hold the arm rest in place. I do believe our hosts here have them. DV
Hay Cowboy, If the Big Block you are referring to is that 496 stroker in your signature, I would look at other transmission options than that...
[updated:LAST EDITED ON Oct-07-02 AT 05:05 PM (CST)]1) do you think I disconnected the wireing inside the tank? Or have I merely done a poor...
I did mine a few weeks ago and I could't agree more about your frustration. I figured it would be a snap as I have a hand rivit tool. Right,,,...
Lower ball joints must be pressed in. You may need to have someone with access to a bench press do those. Uppers are a simple bolt in affair,...
Removal is easy, it's the installation that's hard. From the inside, with a VERY sharp razor knife, cut the rubber around the inside permiter...
> >Would it be safe to s-blast the frame? > Yes, the frame can be sand blasted, but again, I would only consider SAND as the abrasive...
My stock column came out with the wheel still attached. The front seat was already removed AND it is a panel truck though. It should come out OK...
Hi Arizona, You would most likely need to remove the cab and other body parts needing striping and transport them to a shop specializing in...
[updated:LAST EDITED ON Oct-04-02 AT 07:17 PM (CST)]If memory serves me right, it will not fit the 350. It will fit the 327-283. A believe a...
Separate names with a comma.
