Great looking work; I can see where this truck is going to be a winner!
Could you stand back away and have the photo show the position on the truck? Here are panel and suburban rear corners and there are no weld nuts...
I KNEW you had a 55.1 but brain was on vacation or fingers were drunk.
Andy, Have done a number of these and your plans are well thought out. IIRC your truck is a 55.2 so the TF bell housing should mate up to your...
Save the factory hinges if possible, the re-pops are never as good. If the pin has wallowed out the hole in the hinge bracket they make bushings...
Every old shop used to have a hand held suction gun for this. You sucked out most of the oil and then used shop towels to sop up the remainder.
If your wiper arm has a "J" shape curve on the end you raise arm to maximum height and rotate arm into place (no locks IIRC). If the arm is...
Patrick's no longer exists.
I use the plastic one. If a sparrow pees in the same county as your truck the moisture will cause the cardboard to get wavy.
Know what you mean about getting the 5/16 bolt out of the bottom of the divider bar. My pudgy arms look like I refereed a fight between two...
It does on mine. I don't know how to show difference using a computer but here is a before click and after click taken with my camera. Note the...
Nate, if you click on the little picture it goes to full size.
Deve, I guess you need a shot of the t/s assembly with the steering wheel removed. I have a 54/55 first column that has t/s and also was an...
No rear pumps since the mid 1960's.
Now for another head scratcher. My 37 Buick has the poor stepchild of GM overdrive automatics, the 2004R, because it would fit in the cramped...
Nate, There is only one band in a 350 and it is applied for engine braking. If no braking it is the band or the servo that activates the band.
Sorry guys. When one doesn't need hardly any work I tend to forget about them picture wise. The only shot I have is after it was sprayed and was...
I would use a 57. Not a smart a$$ answer just that most are going the other way so a factory set up should not be hard to find. Check with Joe at...
Have not used a regular seal beam in 40 or more years with zero trouble. If the wattage is the same or close the wires don't know if it's standard...
I have a 58 down at the storage yard which I MAY be able to look at if no rain next week. Only got 53 inches so far this year. I have a 55.2 in...
Separate names with a comma.
