Nate, You are going to have to teach Gizmo how to relax and Zig---how bout them Chiefs!
1971 was the first 5 lug Chevy pickup, 1970 had 6.
Got to be coming from the hose or T-stat housing or some place that goes into the coolant system. The valve cover screw holes are blind holes so...
Bill, If no one has a sway bar bushing with a 3/4" hole you can drill the 0.060 ones out if you put them on dry ice first. This makes rubber...
Hey Martinius, I guess your far enough north that your wood business is getting busy. Shop is very busy with a 2 year waiting list to get in the...
We started doing this swap before there was a Mustang II and got them off of junkyard Pinto's---same thing only Pinto strut rod had a better...
As John said this set up is not suited to a "using" truck but where is everyone's imagination. PROBLEM; gas tank here and need fuel filler out of...
Guys in shop all jumped onto a 55.2 pickup last Monday and MII'd it in one day. Johnathon cleaned the frame rails, plasma cut boxing plates and...
I would think a wider board with a matching wider board on the opposite side would work The spring only has to raise the board high enough to get...
Two options on lowering the engine rpms down to a more ear pleasing level and upping fuel mileage. The first and easiest is to replace the 3sp...
Joe, who has Desert Truck Parts and makes the third seat for Suburbans makes license plates but don't know about Texas plates. It is not a cheap...
Good, you can compare it with the tracing I sent you. You can lay your existing glass on the tracings and see if the profile is correct.
Thought I'd check in on your project. Ran across a few pics from a couple years ago that may have some helpful tips. 1 Tidy mounting of...
Bill, How about if I got one in my parts stash with the LOF bug still in the corner I just send it to you? If not, do a search for a...
Looking good. We haven't had any trouble with less belt wrap on a p/s pump IF near factory size tires are used. Wide radials and little wrap will...
One can retain the pedal but not the linkage as it would have to run through the center of the left head. Cut the rubber female rod socket, that...
The old standard for minimizing bump steer is to have the drag link run parallel to the floor so whether spring is extended or compressed it will...
Take your spring(s) loose, U-bolts in front, shackle at rear. Use floor jack to set frame level and measure difference in distance between spring...
Is it a generator or alternator? If a generator tighten belt till there is 1.5" of travel or .75 each direction. If an alternator tighten to where...
If it has screws around the perimeter---yes. If it is crimped then no.
Separate names with a comma.
