Should have a half dozen or so but how many are truck and how many are car I'd have to check. If push comes to shove you could puts the guts from...
That engine compartment and detailing of accessories is PRIMO. Nice truck.
Went back and found a few pics of the 34 under construction, might be of some use. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
We used to use Fog Hollow motorcycle parts but pop up filler caps with threaded bung are on ebay now at less cost. The threaded bung welds to the...
I'd bet it will work. I remember the dual tank trucks had a "tree" with about a half dozen hoses running off of it. IIRC the Chevy tanks were one...
My bad, didn't remember the IRS. On a 52 Suburban we did with the Lincoln/T-bird/Cougar IRS we used the factory under bed tank that had to be...
Nate, Do the mounts set on a straight or angled crossmember? Sounds like maybe the angled so the big biscuit on top has a cast in rubber tube for...
We pretty much use one approach on step side fillers anymore. Use a 22g Blazer tank mounted in the spare tire area and a motorcycle, or pop up,...
Nice work guys. All cuts are clean and smooth and the flat fold on the perch (or porch) shows you can either work with yellow hot metal or have...
That most people would have---losing a driveshaft. Searched shop high and low for driveshaft for nephews T-bucket pickup with no luck. Mentioned...
It's an automatic with us for getting rid of tailgate chains: cut inside edge off of channels at ends of tailgate, mount Ford limiter cable (kinks...
Agree if you have the standard 4.11 or 3.90 rear. With a 3.08 rear if you didn't use granny you would be buying clutches by the dozen.
Andy. We have done several of theses "backward" swaps; auto to standard rather than the other way around. Last one was on a 40 International...
Well, Bill, You got me to wondering because after 30 minutes, let alone 30 years, I sure couldn't remember. Seems as though I made a bell crank...
Something terrible wrong with one that won't hook up, although pickups are dicey with enough engine. Camaro's have all the parts over the counter...
The Explorer rear is 59 inches wide vs the 61" the AD likes. Since you want to keep your wheels it might take a spacer if the tires rub the...
OK, another stab at it. This photo is of a Stromberg carb on a 37 Buick. A piece of 3/16 brake line tubing was routed from the pedal to the...
It looks like he used a Lokar cable which is a good piece but why he went through all the other stuff I have no idea. We usually use a Ford cable...
Use a 10 or 12 gauge jumper across the ammeter terminals and see if anything works. The main feed wire for everything electrical on the truck is...
Steve, We let the first coat dry to where it will imprint but not stick. The second coat is actually a medium wet coat followed by a wet coat. For...
Separate names with a comma.
