Here ya go... http://picasaweb.google.com/rpettycustommurals/DiamondbackTour#
The tour was great. Bill gave us the complete run down on the process. I took lots of pictures and will post the tour soon. The info will...
Shut off valve is best, otherwise loop so that the fluid keeps circulating.
The residual valve goes in each line..one for front, one for rear...They hold back enough pressure to keep the shoes in close proximity to the...
3 years? You guys got to speed it up......I did mine in 4 months, engine, front susp. swap, rear swap, interior, re assembly. I built the 50 in...
Thoser are easy. Use the tool with the handle leading. Get the bead started, oil or armor all the groove, and use a wide flat blade screw driver...
Hell yeah its restorable! Plan on cab corners and floors, they all need those. All parts for these trucks are now being reproduced, so that...
The front of the master, as if it were mounted on the firewall is for the front system. In other words, the chamber furthest away from the pedal...
I have found that 80% of the spot welds can be removed without drilling or grinding. I use a metal paint scraper blade and a hammer. Similar to...
Don't extend the bed, drill out the rivets, slide it to the right length, and re weld, it was designed that way from the factory so they could use...
We are taking a tour of Diamondback on Thursday as we are heading to Run to the Sun at Myrtle beach. I'll take some pictures....
I used an "Its a Snap" 21 circuit harness, now "EZ WIRE"
I just got finished (mostly) with my new wire harness, and she fired up on the first try.....must be livin right......I'll be posting a tech on...
I have found that the bolts i took off usually work pretty well to put them back on.......
If you want easy, just put a m2 like a fatman under it. The money you spend is well worth it, the geometry is done for you, the track width is...
Check this out...http://www.ad-engineering.com/. The s 10 frames have rivets in the center that can be driled out so that the frame can be...
You will be very glad that you did. I have ordered 2 sets from them, and they are beutiful, ride nice, and they have great service.
done 2 v8 and 1 i 6. both went in easily.
I know this is an old post, but I used the "Old Air" HIDDEN SYSTEM from Jim carter. It works well, and is almost invisible inside the cab. I...
O.k, now lets paint and mount the column.... [ATTACH] I previously made up a bottom mount and sheetmetal cover. I like the column to barely...
Separate names with a comma.
