That works also.....looks like you may need to give that upper valve train a little lovin'
Is the temp guage electric also? If so, check the resistance from the sender and make shure it is putting out. Also make shure the paint is...
or, here is how street rodders hack up their trucks. I am extending my previous column by about 1 1/2 inches. I am using the column from a...
I put an, 8.8 ford rear from a 90 town car. These zre in t birds, crown vic s, ltds, mustangs, etc. you can get a 2.72, 3.08, 3.27, up, some...
I found one a while back from Jada. It was pacaged as Jesse James' shop truck. It is light blue with "Bling's Auto Sales" on the door. It has...
Check the ground at both the guage and at the tank. Also, pull out the sender and make shure the rod to the float isn't bent so that it doesn't...
Get a set of front spring hangers off of the rear end of another truck. use them as the rear hangers for the front and that is supposed to give...
which end is up?
A good rust encapsulator like por 15 works great. It will stick to bare metal, and will prevent any future rust.
there is some extra metal in the front of the track for the vents, and some mounts inside the door. You would need to strip down the doors and...
shure, send me pic.s I have neve seen one to pattern after, not that many 3/4 tons around......
use photobucket.com. follow the diredtions, upl;oad photos, then click the links below the pic.s to copy, then paste in your post. you get full...
fiddy won. 3/4 ton longbed. I considered making one, but if anyone has one layin around.....
anyone seen a side mount for a 3/4 ton long bed? I had thought of building one, but seeing as most people are taking them off, I thought I might...
Oven cleaner works well also. Scrape the engine with a putty knife when the engine block is still warm, it comes off easier also....it was hot...
Wow, what a nerd..........good to have around.
they are an extreme pain in the arse. One end of the spring fits in the top of the hinge pocket, the other in a hole in the top of the hinge....
You can use the stock column, just cut off the origional steering box, mount your new box, determine where the steering wheel is most comfortable...
I used a bumper from truck shop, and brackets I ordered, from whom I can't remember, but they were the only ones to make them for 3/4 ton. Lots...
I have seen some of their camaro parts, and they look very good. I would imagine that they did their homework.
Separate names with a comma.
