Anyone? Anyone?? Beuller? Anyone?
Here are the wheels I found for the 53....this is an origional stripe job....
For most people who hire out the work, it is easy to sink 9gs in a body ater buying patch panels and pay the labor to install them, especially...
http://cgi.ebay.com/ebaymotors/1950s-Era-Chevrolet-Pickup-Truck-3100-Old-Store-Display_W0QQitemZ130195291553QQcmdZViewItem?hash=item130195291553
It was way back in '88, I remeber it like it was 20 years ago.....Finally got a '79 mazda wagon....mushroom green, faded clearcoat. It had just...
How do you go about searching the history of my truck? Where do I start? I got it from my uncle, who got it from my other uncle, who had a...
I have the complete assembly, rod, lock, spring, release rod. Came from a 49..yours for the postage.
Ordered the panels from Truck shop in California. They were the one piece toe/floor panels. Lay them out and mark off approximately where to...
Look into a Dodge Dakota rear end...6 lug and about the same track width. Switch out to an open shaft trans...cure all those problems quickly.
I belive Jim Carter sells that cable....
Pipes are 2 1/2 inch, over the axles. They exit just under the bumper. The dash filler was actually a thin piece of sheetmetal that the owner...
My '51 3600, through all of it's progression.... http://picasaweb.google.com/rpettycustommurals/My51
Real rags to riches, here. I built this one last year. http://picasaweb.google.com/rpettycustommurals/DaveS50
Paint on a good rust encapsulator first. It will stop rust and convert any that s already there. You can use Hurcules bed liner, found at Pep...
Here is a link to the album on the '53 I am restoring.... http://picasaweb.google.com/rpettycustommurals/JimS53
In order to use the origional knob with the electric wiper kit, mount the switch in the origional location. Take your origional knob and drill...
I have installed 2 split windshields with the stainless trim, and so far, both leak around the corners, as do most all that I have seen, but, I...
They repro the one with the little green light at the end....look in most large hot rod parts catalogs, they usually have them.
The horn contact/ bearing at the top of the shaft is a press in unit. It will pry out, and I recomend replacing it if you do. Mark your column in...
O.K., I'm doing the paint on the 53. I have the interior...metallic grey, 53 and up specific. The steering column is the grey/brown, like all...
Separate names with a comma.
