Huck brake assistance

[DT's]

Hi all, I have reached out for some help regarding my Huck brakes.

I'm currently trying to locate some Huck break spreader rods for my 1948 chev truck. Need both driver and passenger side.
I am from Australia and finding it incredibly difficult to locate these, both in Australia and America.
If any of you could assist so I can purchase or could suggest anyone or wreckers that could assist it would be greatly appreciated.

 

[vwnate1]

You might try Chevs Of The 40's in Washington state .

e-Bat used to be loaded with old unwanted rear ends .

I typically look in forums for guys who are building Hot Rods and ask, the unwanted stock drive lines are mostly sitting waiting for someone, anyone to come get them years later .

 

[DT's]

You might try Chevs Of The 40's in Washington state .

e-Bat used to be loaded with old unwanted rear ends .

I typically look in forums for guys who are building Hot Rods and ask, the unwanted stock drive lines are mostly sitting waiting for someone, anyone to come get them years later .

Thank you for getting back to me, its much appreciated.
It looks as if I may have had some luck. A couple of blokes reached out and are sending me the parts I was after.

I will however keep that in mind if I find I need anything else in the future.

Thank you.

 

[vwnate1]

You're welcome .

I'm an old Geezer who loves stock vintage Chevys with i6 engines .

I'm beginning to forget a lot but the good people here collectively know everything you'll ever need to know .

Spend some time reading older entries to gather priceless technical info and service / repair tips .