Twisters 4x4
Member
Anyone installed the vent shades from classic Parts? what are the metal clips for and where do they go? I am out of town right now so it might be obvious once i'm home and can see.
-
We have upgraded our forum software! See here for details.
Vent Shades Install
- Thread starter Twisters 4x4
- Start date
Twisters 4x4
Member
well I slide them up where they belong and they are pretty snug. Problem is where do those clips go?
There is a very slight bend to them. Wondering if that has something too do with the clips.
The ones on my 65 have two 1/16 screws.
There is a very slight bend to them. Wondering if that has something too do with the clips.
The ones on my 65 have two 1/16 screws.
Twisters 4x4
Member
Vent Shade Clips
Well,,,, Larry Green Restorations of Cameron TX was able to instruct me that the window seal peels out. Then (With just a little effort) the clips pop in to hold the vent shades in place. After that, Just slip the seal back in over the clips. About three minutes per side.
Well,,,, Larry Green Restorations of Cameron TX was able to instruct me that the window seal peels out. Then (With just a little effort) the clips pop in to hold the vent shades in place. After that, Just slip the seal back in over the clips. About three minutes per side.
