• We have upgraded our forum software! See here for details.

Typical windshield questions

dorcutt

dorcutt

Member
Joined
May 13, 2007
Messages
188
Reaction score
7
Age
74
Location
Keep the truck in VT
need to do something with just the rh windshield on the 51 truck. It has a good bulls eye that appears to growing. Have a couple of questions please.
Can I just pull the one side with out pulling the other side? It looks like a single piece of rubber.

Would you consider giving the job to one of the advertised windshield replacement guys that you read about and come to your home to replace it?

Should I get a new gasket to replace? The old one isn't original and looks to be in good condition.

In reading the forum it looks like it will be a bear to do it myself and am some what aprehensive about trying it. Any help and direction would be appreciated as always. Thanks, Dave
 
That's a good and interesting question. I look forward to hearing comments on this.
I remember another truck I had. I no sooner put in new glass and here came a rock. New glass, another rock. New glass, another friggin rock! Thank God my insurance paid to have it replaced while it was parked in the parking lot of my place of business at the time.
 
Dave, this is a loaded question. First, the windshield gasket is one piece and chances are that you will tear at least half of it up removing the bad glass. My thought would be to get a new gasket, replace the bad glass and re-install the entire windshield unit. While you've got the entire windshield out, inspect the metal around it for rust and repair if necessary.

As far as having a guy come out and repair it for you, be aware that most of them don't have a clue about older vehicles. If you don't feel comfortable doing it yourself, look for a shop that has experience with older vehicles. I've always had good luck with Binswinger.

Lastly, search this forum for ideas on what some of us have done and look at Ol' Chebby's how-to tech threads. Very insightful.

Hope this helps!

Ken
 
If your rubber is soft and pliable, yes you can do one pane and not the other. I just did this a few weeks ago on a 51. It does help to have another hand to help hold the glass and push where needed, but I have done it by myself....it ain't fun. Keep your old glass to compare to the new glass, it may need to be trimmed. Look at my tech thread on this.
 
Thanks all for the insite. I was thinking about removing the windshields, take the time to clean up the metal around them and then get a windshield company to come out and help me reinstall. Question is how can I get them out with out breaking them as I would like to use the old one to check the new size. Any suggestions, this will be my spring project as to cold in the barn right now. Thanks, Dave

ps. I follow old chebbys threads religiously, thanks
 
dorcutt said:
Thanks all for the insite. I was thinking about removing the windshields, take the time to clean up the metal around them and then get a windshield company to come out and help me reinstall. Question is how can I get them out with out breaking them as I would like to use the old one to check the new size. Any suggestions, this will be my spring project as to cold in the barn right now. Thanks, Dave

ps. I follow old chebbys threads religiously, thanks
Click to expand...

If you plan to replace the rubber just cut the rubber. Both pieces of glass are the same so you can use the good side to match up with your new piece. You probably have to replace the rubber anyways if a company is coming to reinstall because they may not use the old rubber.
 
I would suggest you find the nearest "mom & pop" style glass shop (not a chain) as the owner or one of the workers has likely been in the business long enough that they would know what they are doing AND if it is near your place, then likely they would not mind coming by to lend a hand since you would be buying the new glass from them? They may want your old glass to use as a pattern - AND i am assuming that the driver's side is an exact reverse match for the passenger's side. If all you have around you are "chain" stores, then mom & pop might have bought into a franchise and you might still have luck with an older person with vintage car experience - or know of someone who has retired that can help.

I see you are in Canada. I am not sure about where you are, but some of the States here in US require insurance companies to replace broken windshield glass for free (at least it is covered under your policy with no deduction).

good luck
 
windshield install

i attempted an install with new rubber and new glass. let's just say it was not my finest moment. second time around with steele rubber and a local private windshield shop, much more satisfactory.
 
New Windshield

No charge ? really ? .

Even in The Peepole's Republik of Californy ?

One of my cars has a severely sand pitted winshield and a bullseye crack....
 
vwnate1 said:
No charge ? really ? .
Even in The Peepole's Republik of Californy ?
Click to expand...

I found this on the net - not sure how current it is:

The following states have laws that require insurance companies to replace a signficantly damaged windshield and waive the deductible for a driver who has comprehensive insurance:
  • Arizona
  • Florida
  • Kentucky
  • Massachusetts
  • New York
  • South Carolina
 
New Windshield

Oh well .

Thanx for trying .

Dollar for Dollar , replacing the windshield in any old vehicle will give you the very best bang for the Buck .

My old Mercedes is rediculous .
 
I had my windshield replaced for free. I have full coverage on my '49 2 ton.

A crack developed & I was able to get the glass company to come out & replace both pieces of glass & I badgered them about the gasket & made them show up with a new Steele Reproductions gasket.

It was kinda nice having someone else do the work while I watched & sipped on a beer.:D
 
windshield

Thanks all for the advise. Interesting piece on the insurence side of things. I keep the truck registered in VT so I think I'l clear. The take away on all the threads that I have searched imply I should use the steel rubber instead of our host, there seems to be one heck of a price difference between the two. Dave
 
Quality Is Priceless

You'll be sorry if you buy Taiwanese rubbers......

Poor fit and short life .
 
Ol Chebby, I'm assuming that was a positive comment on the steel rubber. I'm not ready to take the cheap direction at this point. Thanks again to all for you comments. Dave
 
You must log in or register to reply here.
Back
Top