There are myriad MII's to choose from, some good others a POS. I personally like Fatman which is many times stronger than the straight axle but of...
Get rid of the factory cross shaft and put a modern cable with an equalizer set up. We do this on every S10 conversion.
Andy, I worked in a shop while in college that did work on big rigs with 24v electrical systems. It was a termination offense to have ANY kind of...
Nate, Sure wish we were closer together as we have worked on exactly ONE VW in our shop. Was a Super Beetle Convertible and our upholstery guy...
DO NOT TITLE IT BY THE FRAME!!! The only time a customer got in trouble was when I followed the DVM rules and titled a 51 GMC pickup as a 74...
Nate, You said it pops out of third gear but is it a three or four speed trans? I have a couple of 1937 4 speeds but have no idea if they would...
Stick it in and run it. New bushings will keep the spring eye bolt centered for a long time. 3.73 is perfect if you ever go with an OD...
Very poor design which I DO NOT recommend to anyone but here's how to check to see if it will even give correct amount of turn. Remove tie rods...
Guys, Do a search on remote "mount brake booster". No reason the brake set up needs to be in factory location. On many of our street rods the...
I have a 50 3/4 ton but I'm 85 with health issues so can no longer pull parts down at the storage yard. I'm 60 miles NE of Dallas so if your...
We have used plastisol to seal the rivets, it's the stuff they coat tool handles with. Usually the rivets don't leak but if they do I think I...
Mike, This old dog learned something new; I had no idea there was a 1bbl efi unit available. Under 1k which to me is a bargain to get rid of a...
The drawback on EFI for a Stovebolt engine is that no EFI I know of is offered for a 1 barrel intake. Most opt for a 4bbl intake with a 4bbl to...
The old stovebolt engines are good at what they were designed for: good torque at a low rpm but the TERRIBLE head design and siamesed intake and...
Haven't used a point distributor since I moved out of the cave but when I did I set the points on the GM top weight BEFORE I put on the rotor. Now...
Separate names with a comma.
