Search results

I bought a bell housing for my 54 3100, cast number 3835201, and I'm missing some parts. I need the inspection cover that goes on the top of the housing. I also would like to know if anyone knows of a source for the shaft that sticks out from the side that holds the shift linkage? I think I'm...

I could use some help!! I want to replace my fiber cam gear with the aluminum one on my 1959 235 cu in chevy engine. All the online parts listings show models covered up to 1958 and then for 1960 but no 1959. Was there a change in the crank gear or some other issue that causes the 1959 to be...

I could use some help. I'm prepping to install my fenders. I have the kit for the anti-squeak(S) and the foam liner. Ol-Chebbys tech guide doesn't show detailed installation. I have fit checked the anti-S and see its larger than the area to be covered. Also I'm not sure exactly how the ends are...

Can you tell me the correct installation on the drag link. I have a 49 1/2 ton with the solid drag link. I bought the rebuild kit with end plugs and springs etc., The problem I have is which end goes to the steering box and which end goes to the wheel. One end of the housing is a bit longer...

I would have posted in the electrical shop but there is no activity there. I have a question about hooking up the voltmeter in my 49/3100/1/2 ton panel truck on the back of the cluster are the 2 pins but they are not marked positive or negative can someone tell me which pin to connect the...

I was looking for a spare tire carrier and member David 433 sent me a conversation with the number to a so called Bryan Park 346-306-3748. I call the guy (sounds oriental) and he said he had one and asked me to text to that number you gave me (David433), and we discussed and agreed on price. He...

Still looking for an original spare tire carrier for my 49 panel. Anybody got one?

Well I could use some help finding one of these originals for my 49 Panel Truck. Chevs of the 40's has a listing but its not available and our host doesn't list one either so a repop is out and I never see one listed in the for sale forum and evil bay hasn't had a listing either. So if anyone...

Here's the problem - The clutch fork spring will not stay in the fork and then the fork hits the bolt heads on the rear of the Borg and beck pressure plate. Second issue: clutch will not release allowing shifting of gears. Here's some background: I have a rolling chassis with a 54 235 installed...

I need the clips and little spring things that are inside the windshield molding frame. I am also looking for a picture of the original installation or a description of where they should be located. I don't know how many there are supposed to be because most of mine are missing because I didn't...

I Need a firewall bulkhead connector for a 1987 Chevy dually.

Anyone have a picture of where the clips and springs on the windshield garnish should be located. I sent my parts to the dipper and didn't realize some of the clips and springs would be lost. what remains have been moved around and I don't know where they should be located or how many clips are...

Rebuilding my doors and after removing all the mechanicals a couple years ago I now need help with how to put it all back together. My primary issue is what goes in first. I have replacement channels for the front run channel and did a test fit and see that they must hook to the door latch...

Is it possible to change the 49 steering box and column over to the 54 so I can have factory stock turn signal setup. I know I could add an after market turn signal switch but I wold like it to look more original.

Looking for complete 54 steering column/box/shifter/assy.

I Have a 54 235 engine with a Rotttenchester B carb in my panel truck. I bought a replacement carb from O'reillys and it came with a larger fitting size in the air horn than the one I removed so my stock fuel line won't connect to the carb. I looked on line and can't find the correct size...

Looking for a source for the rear brackets for the splash pan on my panel truck. Any help appreciated

Anybody have some pics of the rear corners of the panel truck cab. Mine are severely rusted and missing in places. I am trying to rebuild them and there are several nut plates that have to be located and fitment issues. If anyone has rebuilt these areas and has some pictures or advice I could...

I've checked every page of my assembly manual and I can't find which of the fender blank off plates goes on which side. I think the one shaped like an "L" goes on the drivers side but don't understand why its shaped like an "L" and the other one goes on the passenger side but don't know how it's...

First item - anyone have a source for the early license plate frames. The ones to fit a 12 inch wide plate from the 40's. Second item - anyone have a source for the textured card/hard board side panels in the interior of a panel truck. Thanks Craig