Search results

Thankyou :)

Thank you They Look very well made. I will try to clean them up And post some better pictures. And Yes Home made are Some times Better than Factory, or aftermarket Like my Panel Truck! :D

Thanks Another friend Said They were Home made And I do trust his Judgment when It comes to 'Car fix' s :D

A friend Gave me these. Does any one know any thing about the manufacture or are they home made? This shot includes both uppers and one lower If these are acceptable I will replace the ball joints and the bushings they look well made. but i don't know anything about them?:cool:

'Sand able primer' building primer etc. is not meant to be smooth but it can be. you can experiment with your pressure, and feed. your spray fan and your speed when applying. if your gong to fast. along your surface or to slow. yah it's a lot to take in all at once.:eek: but you'll get it. I...

I stared with 1991 Chevy Caprice Power Heated Mirrors. and this is what I came up with; I had to extend and move them out from the door so the wing windows would still operate. first fab. now to duplicate to drivers side. a little re-shaping. and add mounting tabs...

Did you get this straightened out?:o

Thank you, sir.

Here is a Diagram I found This may help I think it's item 56, I realized It was called a 'perch' where I have experience. Here they call it a bracket. but I now see what you mean. I can make that.:D

Thank you GoincGM; I may have forgotten or not aware of the "pedestal" for the frame mount, is that in reference to the rear end I'm into so many different Professions, I get SO CONFUSED. If you can post a shot of one I'll find the item and install it. The rest of your information just...

Here's some thing else which may or may not be of interest. I've been thinking of lowering my front end so I looked up ball joints nope not the same BUT the 91 caprice front rotors( According to O'Reily online parts comparability) will work on my 77 GMC pickup, but the pickup rotors will not...

I looked up my 1991 carpice donor car and the frame bushings are the same http://www.oreillyauto.com/site/c/detail/MPC0/K6476.oap?ck=Search_02972_1142772_-1&pt=02972&ppt=C0106 also the sway bar link kit is the same...

Thanks My 1ton 4x4 dually doesn't have a rear sway bar( it should with the utility box) but it does have a front one. Same as my 88 square 4x4 1/2ton suburban but no rear. My 77 GMC is 2 wheel drive. I checked the lower control arms and there are two holes on the front curve facing up word...

Ok here it is. I have a 1977 gmc 1/2 ton 2x4, was a sway bar stock equipment? my truck does not have one. Also rear sway bar options for a leaf spring applications was there ever a factory option for the body type? like for the camper special, or the gentlemen jim PU etc? If so I would...

Okay the cure, It was not the timing chain, although it was loose. I went and bought a Carb kit came home opened my shop to work on the panel truck and my neighbor came over to see how things were going and he was baffled also with the symptoms, you have to have air going in to the engine...

I'm not sure if this is where I should post this but please bare with me. Next Project on my panel truck was exhaust. I went to my local tire and mechanics shop and got a quote for $350, not bad for around here. I made an appointment took my panel truck in and got a call back at home about 1/2...

Thank you PCM, PCM. I will try to remember. :rolleyes:

Thank you drabo, from what I could see concerning the intakes, by way of gaskets there was very little difference, gasket kit wise. but I needed to be sure Concerning the flow rate can't that be adjusted by way of chip or injection opening duration.(sorry I can't remember the correct term)...

VW nate, My goal is to use the turn signal wiper switch. Although that's not a bad Idea:p

Thank you, I was planning to allow for putting a 'super chip' in the control unit if I need to. I was just wondering if the intakes would interchange with out to much trouble. the gaskets look different on the ports but the bolt patterns look the same the angles are what concern me, and the...