Winshield

[dado]

Whats the easiest way to remove a windshield ( In one peace )Seal is hard & cracking glass in good condition Thanks .

 

[4JSAToo]

Remove any trim molding if you have it and then take a razor knife with a new blade and cut off the exterior rubber seal. Then bump out the glass from the inside. It's good to have a helper..
Bob

 

[dvalentine]

Remove any trim molding if you have it and then take a razor knife with a new blade and cut off the exterior rubber seal. Then bump out the glass from the inside. It's good to have a helper..
Bob

Loosen up the seal around the outside with a putty knife, THEN.
Cut the seal from the INSIDE, then bump the glass OUT. Place a comforter or a few layers of drop cloth over the hood, and get a friend or two to help.

Watch the edges !!! After it's out, clean and place blue painters tape over the edges ot fth glass to help minimize chipping.

dv

 

[4JSAToo]

Works either way....
Bob

 

[dado]

Well cracked the first glass however the parts truck came right out cab almost gutted hopefully will get finished this week in the evenings blast & epoxy prime this weekend we will see . Thanks for the help with the glass .