• We have upgraded our forum software! See here for details.

'53 Chevy truck- Crazy Adventure

Hello guys,

I will also share with you the pain, not only the joys that
a restoration can give :).

I have a problem with the windshield, my truck is born without the Deluxe SS Trim but I decided to install this because I like the most.

I followed all the instructions I found on the web but the rubber in the corners at the bottom does not fit well.
I bought everything new, glass, rubber and SS Trim.

What do you think? Why I have this problem? Perhaps the windows need a small cut in the middle? Please someone who has passed this difficult time can help me understand?


Any help will be appreciated. Many thanks

Some pics:

WIND6.jpg


WIND5.jpg


WIND4.jpg


Wind11.jpg


Wind10.jpg
 
Rubber window seals !

Frank good day to you.

Using soap and a peace of rope is the way to go when installing the window rubber seals. Either you have moved the corner under install or the rubber seals are to long ! These molding are pressmade to fit , means they have a lenght and form that is a snug fit. Take the glass out and se how it fits in the corners , ask a friend to help you to keep it in position. It will show at once how the rubber reacts when pressing it in the corners. If this is the case return it to the vendor and buy rubber window seals at another vendor. Ol`chebby on this forum is the guy to ask , he has done a great job with his truck (ground up restoration) Ask him for more information and an adress for the correct rubber seals.

Scroll down on Ol`chebby page ; https://talk.classicparts.com/showthread.php?t=9530&page=5



Martinius.
 
Last edited:
Blueflame236 said:
Frank good day to you.

Using soap and a peace of rope is the way to go when installing the window rubber seals. Either you have moved the corner under install or the rubber seals are to long ! These molding are pressmade to fit , means they have a lenght and form that is a snug fit. Take the glass out and se how it fits in the corners , ask a friend to help you to keep it in position. It will show at once how the rubber reacts when pressing it in the corners. If this is the case return it to the vendor and buy rubber window seals at another vendor. Ol`chebby on this forum is the guy to ask , he has done a great job with his truck (ground up restoration) Ask him for more information and an adress for the correct rubber seals.

Scroll down on Ol`chebby page ; https://talk.classicparts.com/showthread.php?t=9530&page=5



Martinius.
Click to expand...



Thank you very much Martinius,

now I try to contact Ol Chebby.

Thank for you help :)
 
Re : WIndshield Rubber

You're using Chinese rubber there , it's crap and this is a common problem .

Buy the correct one from Steele Rubber Co. , it's American made and top quality .
 
vwnate1 said:
You're using Chinese rubber there , it's crap and this is a common problem .

Buy the correct one from Steele Rubber Co. , it's American made and top quality .
Click to expand...



I do not know if this is made in china.....maybe made in taiwan ::D.

Do not say the name to avoid bad publicity, but if you do you advise me to buy a Steele Rubber, I try to see if they send in Italy.

Thank you so much for your help :)


Frank
 
Steele rubber

Hey Frank,

i´ve just ordered the windshield rubber from Steele, as everyone on this forum
recommended, not to use the stuff our host sells.

You can do this online with no problem at all, the rubber arrived a few days
later and the installation of the windshield was a breeze. Just use enough
soapy water and a rope or i use a wire, to do the job:)
 
Elky67 said:
Hey Frank,

i´ve just ordered the windshield rubber from Steele, as everyone on this forum
recommended, not to use the stuff our host sells.

You can do this online with no problem at all, the rubber arrived a few days
later and the installation of the windshield was a breeze. Just use enough
soapy water and a rope or i use a wire, to do the job:)
Click to expand...




Hi Elky,
Thanks.

I also ordered the rubber as soon as I meet. I used the soap and then try it with silicone spray but ..... nothing to do, the problem was not the soap :)


Waiting to install the windshield I'm doing the brake line in stainless steel...


Thank you so much for your help


Frank
 
Hello to all,

If someone were interested, I will post some pictures of the glass conversion to a piece

Parts from Classicparts:

DOORGLASSKIT2.jpg



I started buying a U-iron for the reproduction of the glass channels....

WINDOWCHANNELS1.jpg


WINDOWCHANNELS2.jpg


WINDOWCHANNELS3.jpg


WINDOWCHANNELS5.jpg


WINDOWCHANNELS6.jpg


WINDOWCHANNELS7.jpg


WINDOWCHANNELS9.jpg


WINDOWCHANNELS10.jpg


WINDOWCHANNELS20.jpg
 
Follows....

WINDOWCHANNELS22.jpg


Front Channels brackets.
I wanted to hide the screws to make a clean and invisible work.

For you would be much easier to replace the doors with the '50 truck
but for me it was the best solution

WINDOWCHANNELS28.jpg


WINDOWCHANNELS29.jpg


WINDOWCHANNELS33.jpg


WINDOWCHANNELS35.jpg


WINDOWCHANNELS37.jpg


WINDOWCHANNELS38.jpg


Inside door

WINDOWCHANNELS41.jpg


1PIECEDOORWINDOW02.jpg


WINDOWCHANNELS44.jpg
 
Italy location.

Thank you for sharing Frank. I love watching and learning from your work in progres . What profesion do you have by the way and where are you located in Italy ?

Martinius . The place of the mysterious viking rituals , Hov Norway.
 
Steele window rubber part number !

Guys.
Checked out the rubber in the front window today. Mine has excactly the same problem and needs to be changed. What part number does the rubber seal have from Steele.

Apreceate the information Martinius
 
Last edited:
Wow this is great! Talk about top notch work here. Truck was beautiful, now its a stunner. Fantastic job, truly professional work there.

Thanks for all the pics. Looks great!!!
 
More Pics about 1 piece glass door conversion

Glass channels and brackets ready to install

WINDOWCHANNELS50.jpg


WINDOWCHANNELS49.jpg


Window regulator positioning

1PIECEDOORWINDOW05.jpg


To drill door

1PIECEDOORWINDOW06.jpg


1PIECEDOORWINDOW10.jpg


1PIECEDOORWINDOW11-1.jpg


Brackets measure

channelglassbrackets2.jpg


channelglassbrackets1.jpg


For any questions please ask, I am always at your disposal :)

Frank
 
Blueflame236 said:
Thank you for sharing Frank. I love watching and learning from your work in progres . What profesion do you have by the way and where are you located in Italy ?

Martinius . The place of the mysterious viking rituals , Hov Norway.
Click to expand...


Thank you so much Martinius :).

I live in Rome and I'm tires dealer




Frank
 
Hello guys,

I just bought a new windshield rubber to SteeleRubber.com,
arrive between 6/10 days.

Thanks to everyone for the advice, I really hope that the problem is that :)


Frank
 
Good work Frank ! .

Keep it up , I only wish you were doing restoration works instead of Custom .

This thread will be invaluable for those who come next .
 
You must log in or register to reply here.
Back
Top