Search results

A friend Gave me these. Does any one know any thing about the manufacture or are they home made? This shot includes both uppers and one lower If these are acceptable I will replace the ball joints and the bushings they look well made. but i don't know anything about them?:cool:

I stared with 1991 Chevy Caprice Power Heated Mirrors. and this is what I came up with; I had to extend and move them out from the door so the wing windows would still operate. first fab. now to duplicate to drivers side. a little re-shaping. and add mounting tabs...

Ok here it is. I have a 1977 gmc 1/2 ton 2x4, was a sway bar stock equipment? my truck does not have one. Also rear sway bar options for a leaf spring applications was there ever a factory option for the body type? like for the camper special, or the gentlemen jim PU etc? If so I would...

I'm not sure if this is where I should post this but please bare with me. Next Project on my panel truck was exhaust. I went to my local tire and mechanics shop and got a quote for $350, not bad for around here. I made an appointment took my panel truck in and got a call back at home about 1/2...

Howdy before I do this and start pulling whats left of my hair out chasing vacuum leaks, I need a little feed back I know I may need to do some adapting, Has any one put a EFI from a fuel injected ( 91 caprice 305 ) to a 85 4blt main 350 carb'd engine. What problems should I look for. Or...

Hello Again, I have a 1988 GMC Suburban, I think it is? I bought it as that, My Vin #Say other wise may be a Cross over model these are the first ten of the dash plate vin #(1GK16K7K) getting to the Point. I have Had an intermittent electrical problem It seems to be coming from either the fuse...

I saw this out out side my door today any Ideas which model this is :eek:

howdy I'm looking for any kind of illustration for a rear system I have all the lines from the rear foreword to the engine compartment. I also have a A/C system for a truck with out rear air. it's been 20= years since I worked on a vehicle with rear air and it was an ARA system ford van as I...

Ok folks here we go. I've Been merging my 77 gmc with my 87 and I've run into a interesting situation, my dash ,From the 87, doesn't have power to any gauges. I used the engine side harness from my 77 and plugged it into the 87 harness in side. it starts and runs turn signals and head lamps...

I've been fighting with a Problem Again! After reinstalling my engine in my 1980 One ton dually 4x4. my clutch hangs up and the pedal doesn't return all the way unless I hook it with my foot and pull it up. Are all of the clutch pedal systems of this model, 1973 to 87, the same? Mine has a...

Got one for ya. 1980 One ton 4x4 350 dually manual 4speed tranz Engine ran well on stand. I installed it back in my Truck and I couldn't keep fuel in carb. had to prime it every time I started it checked fuel pressure and was getting only 2 lb so I replaced the fuel pump, the old one was...

I'm looking for the datum plain specs, ('Chuck's' site only covers pickups), for my 88 GMC suburban I think it's twisted. Thanks:)

Hay I know this thread is going to get some eyes rolling but I'm working with limited funds and doing my best with what I've got. To the point I have a 87 suburban body which I'm Making into a 77 GMC panel I'm wondering Which way to go with the forward wiring the 87 was fuel injected and...

Hello again I have some general Information and trouble shooting questions about intermittent GM wiper systems. # 1 in my 1988 GMC Suburban the wipers work in High, low, and wash but not in any of the 'Intermittent' positions. IS THIS a DEFAULT scenario? I have changed the small black box...

Hay Gents & ladies I've got 3 electrical problems in my 1988 GMC suburban 1.Horn fuse Keeps blowing I think its the horn relay? I hooked up the fuse and it sounded is if a small motor was Moving into a set position like a cd player. hit the horn and it worked only one horn hit it again and...

I've received a 91 Chev caprice Blown engine and hole coming up through the floor behind the passenger seat in front of the back seat don't ask how, something about sand dunes and drinking? no other damage surprisingly and no It wasn't ME!!! and I have A 1977 GMC 1/2 ton Two wheel drive daily...

Howdy I picked Up a 1987 donor Suburban for parts And it had Rear air The one I presently have is A 1988 With out the 87was missing the Suitcase (a/c Evaporator Box) and the compressor How do they split the flow is it before the accumulator or after? Is there a 'Tee' before or after the...

Ok I finely opened up my sub rear end and Wow what a mess the side gears which the axles fit on are striped, ring gearand pinion look fair, but I don't trust them. the pin which goes through the two other gears is bent with one gear stuck on it at 40 degree angle the retaning bolt is bent the...

Still looking for a set of fiber glass 1 ton fenders for a 73 and up pickup I saw a set on a suburban once and since my 80 one ton utility 4x4 is dead 200Kmiles Plus why not convert the suburban it will make a nice towing rig this way my one ton axels are good new steering box new rear end...

Hello Again Does any one know of a Link to where I can get The code Brake Down For The glove box SPID Lable :D